AMX NetLinx Integrated Controller NI-4000 Instruction Manual page 118

Programming
Program Port Commands (Cont.)
SET IP <D:P:S>
SET TIME
SET URL <D:P:S>
SHOW DEVICE <D:P:S>
SHOW LOG
SHOW NOTIFY
SHOW REMOTE
SHOW ROUTE
SHOW SYSTEM
TCP LIST
TIME
URL LIST <D:P:S>
112
Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address,
Subnet Mask, and Gateway IP address. Enter Y (yes) to approve/store the
information in the Master Card. Entering N (no) cancels the operation.
Prompts you to enter the new time for the Master Card.
When the time is set on the Master Card, the new time will be reflected on
all devices in the system that have clocks (i.e. touch panels). By the same
token, if you set the time on any system device, the new time will be
reflected on the system's Master, and all connected devices.
This will not update clocks on devices connected to another Master (in
Master-to-Master systems)
Prompts you to enter the URL address and port number. Enter Y (yes) to
approve/store the new addresses in the Master Card. Entering N (no)
cancels the operation.
Displays a list of all devices present on the bus.
Displays the log of messages stored in the Master's memory. The Master
logs all internal messages and keeps the most recent messages. The log
contains:
• Entries starting with first specified or most recent.
• Date, Day, and Time message was logged.
• Which object originated the message.
• The text of the message:
SHOW LOG [start] [end]
SHOW LOG ALL
• If start is not entered, the most recent will be first.
• If end is not entered, the last 20 messages will be shown.
• If ALL is entered, all stored messages will be shown, starting with the
most recent.
Displays a list of devices that other systems have requested input from
and the types of information needed. Note that the local system number is
1061.
Displays a list of the devices this system requires input from and the types
of information needed. When a NetLinx Master connects to another
NetLinx Master, the newly connecting system has a device that the local
system desires input from; the new system is told what information is
desired from what device. Note the local system number is 1062.
Displays information about how this NetLinx Master is connected to other
NetLinx Masters.
Provides a list of all devices in all systems currently on-line. The system's
lists are either directly connected to this Master (i.e. 1 hop away), or are
referenced in the DEFINE_DEVICE section of the NetLinx program. You
may provide the desired system number as a parameter to display only
that system's information (e.g. SHOW SYSTEM 2001). The systems listed
are shown in numerical order.
Lists all active TCP/IP connections.
Displays the current time on the Master Card.
Displays the list of URL addresses programmed in the Master Card.
NetLinx Integrated Controllers