Input Function Default And Possible Settings - Pioneer sc-9540 Operating Instructions Manual

Basic Setup
6 Select the input(s) to which you've connected your
component.
For example, if your DVD player only has an optical
output, you will need to change the DVD input function's
Digital In setting from COAX-1 (default) to the optical
input you've connected it to. The numbering (OPT-1 to 4)
corresponds with the numbers beside the inputs on the
back of the receiver.
• If your component is connected via a component
video cable to an input terminal other than the
default, you must tell the receiver which input
terminal your component is connected to, or else you
may see the S-Video or composite video signals
instead of the component video signals.
7 When you're finished, proceed to the settings for
other inputs.
There are three optional settings in addition to the
assignment of the input jacks:
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
• Input Skip – When set to ON, that input is skipped
when selecting the input using INPUT SELECT or the
front panel INPUT SELECTOR dial. (DVD and other
inputs can be still be selected directly with the input
function buttons.)
• 12V Trigger1/2 – After connecting a component to
one of the 12 volt triggers (see Switching components
on and off using the 12 volt trigger on page 38), select
MAIN, ZONE 2, ZONE 3 or OFF for the corresponding
trigger setting to switch it on automatically along
with the (main or sub) zone specified.
4b.Input Setup
A/V RECEIVER
Input :
Input Name :
Input Skip :
Digital In :
HDMI Input :
Component In :
12V Trigger1 :
12V Trigger2 :
Exit
8 When you're finished, press RETURN.
You will return to the System Setup menu.
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in Setting the Video options
on page 83), you must connect your TV to this receiver using the same type of video cable as you used to connect your video component.
1
DVD
Rename
OFF
COAX-1
- - -
Comp-1
OFF
OFF
Finish

Input function default and possible settings

The terminals on the receiver generally correspond to the
name of one of the input functions. If you have connected
components to this receiver differently from (or in
addition to) the defaults below, see The Input Setup menu
on page 44 to tell the receiver how you've connected up.
The dots () indicate possible assignments.
Input
function
Digital
DVD COAX-1
BD
TV/SAT OPT-1
DVR OPT-2
VIDEO1 OPT-3
VIDEO2 
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HOME
MEDIA
GALLERY
iPod/USB
XM
CD COAX-2
CD-R/TAPE OPT-4
TUNER
PHONO
MULTI CH IN

SIRIUS
a.With KURO LINK set to ON, assignments cannot be made (see
KURO LINK on page 79).
b.This assignment is fixed and cannot be changed.
Input Terminals
HDMI Component
a

IN 1
b
(
BD)
a
 
a

IN 2
a
 IN 3
a
 
(
HDMI-1)
(HDMI-2)
(
HDMI-3)
b
(
HDMI-4)
a

04
45
en