The System And The Other Setup; Making Receiver Settings From The System Setup; Menu; Manual Speaker Setup - Pioneer sc-9540 Operating Instructions Manual

12

The system and the other setup

Chapter 12:
The system and the other setup
Making receiver settings from the
System Setup menu
The following section describes how to change the
speaker-related settings manually and make various
other settings (input selection, OSD language selection,
etc.).
RECEIVER RECEIVER SOURCE
DVD BD DVR HDMI
HOME MEDIA
TV CD CD-R GALLERY
iPod USB TUNER XM SIRIUS
1 Switch on the receiver and your TV.
Use the  RECEIVER button to switch on.
• If headphones are connected to the receiver,
disconnect them.
RECEIVER
2 Press
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
• Press HOME MENU at any time to exit the HOME

MENU.

3 Select 'System Setup' from the HOME MENU, then
press ENTER.
4 Select the setting you want to adjust.
Note
1 Make sure not to switch off the power when using the System Setup menu.
2 You can't use the HOME MENU when either the HOME MEDIA GALLERY, XM, SIRIUS or iPod/USB input function is selected or the
headphones are connected. When you set ZONE 2, ZONE 3 or ZONE 2&3 to ON (page 85), you can't use the HOME MENU.
108
en
AUDIO VIDEO
ANT
PARAMETER PARAMETER
LIST TUNE TOOLS
AUDIO
TOP MENU T.EDIT
BAND GUIDE
MULTI OPE
PRESET ENTER ENTER PRESET
REMOTE
SETUP
CATEGORY RETURN RETURN
HOME HOME
TUNE
MENU MENU
iPod CTRL
1
, then press HOME MENU.
HOME MENU
A/V RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
Exit Return
4.System Setup
A/V RECEIVER
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
Exit Return
• Manual SP Setup – Sets the type of connection used
for surround back terminals and the size, number
distance and overall balance of the connected
speakers (see Manual speaker setup below).
• Input Setup – Specifies what you've connected to
the digital, HDMI and component video inputs (see
The Input Setup menu on page 44).
• OSD Language – The GUI screen's display language
MPX PQLS MEMORY
can be changed (see Changing the OSD display
language (OSD Language) on page 42).
INFO CH
DISP
• Other Setup – Changes customized settings to
RECEIVER RECEIVER
TV CTRL
reflect how you are using the receiver (see The Other
Setup menu on page 112).
ZONE 2 ZONE 3
MAIN

Manual speaker setup

This receiver allows you to make detailed settings to
optimize the surround sound performance. You only need
to make these settings once (unless you change the
2
placement of your current speaker system or add new
speakers).
These settings are designed to customize your system,
but if you're satisfied with the settings made in
Automatically setting up for surround sound (Auto
MCACC & Full Band Phase Control) on page 42, it isn't
necessary to make all of these settings.
CAUTION
• The test tones used in the Manual SP Setup are
output at high volume.
1 Select 'Manual SP Setup', then press ENTER.
See Making receiver settings from the System Setup menu
above if you're not already at this screen.
4.System Setup
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
Exit
2 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
4a.Manual SP Setup
A/V RECEIVER
1. Surr Back System
2. Speaker Setting
3. Channel Level
4. Speaker Distance
5. X-Curve
6. THX Audio Setting
Return Exit
A/V RECEIVER
Return