Pioneer sc-9540 Operating Instructions Manual page 124

13 Additional information
Symptoms
The PC or Internet radio is not
properly operated.
The audio files stored on
components on the network,
such as a PC, cannot be
played back.
Cannot access the
component connected to the
network.
Audio playback is undesirably
stopped or disturbed.
Cannot access Windows
Media Player 11.
Cannot listen to Internet radio
stations
The Home Media Gallery
cannot be operated with the
buttons on the remote control.
124
en
Causes
The corresponding IP address is not properly set. Switch on the built-in DHCP server function of
The IP address is being automatically configured. The automatic configuration process takes time.
Windows Media Player 11 is not currently
installed on your PC.
Audio files were recorded in formats other than
MP3, WAV (LPCM only), MPEG-4 AAC, FLAC, and
WMA.
Audio files recorded in MPEG-4 AAC or FLAC are
being played back on Windows Media Player 11 or
Windows Media Connect.
The component connected to the network is not
properly operated.
The component connected to the network does
not permit file sharing.
The folder stored on the component connected to
the network has been deleted or damaged.
The component connected to the network is not
properly set.
There are no playable audio files on the
component connected to the network.
The audio file currently being played back was not
recorded in a format playable on this receiver.
The LAN cable is currently disconnected.
There is heavy traffic on the network with the
Internet being accessed on the same network.
You are currently logged onto the domain through
your PC with Windows XP installed.
The firewall settings for components on the
network are currently in operation.
You are currently disconnected from the Internet. Check the connection settings for components on
The broadcasts from an Internet radio station are
stopped or interrupted.
The remote control is not currently set to the
Home Media Gallery mode.
Remedies
your router, or set up the network manually
according to your network environment (page 74).
Please wait.
Install Windows Media Player 11 on your PC
(page 67).
Play back audio files recorded in MP3, WAV
(LPCM only), MPEG-4 AAC, FLAC, or WMA. Note
that some audio files recorded in these formats
may not be played back on this receiver.
Audio files recorded in MPEG-4 AAC or FLAC
cannot be played back on Windows Media Player
11 or Windows Media Connect. Try using another
server. Refer to the operation manual supplied
with your server.
Check whether the component is affected by
special circumstances or is in the sleep mode.
Try rebooting the component if necessary.
Try changing the settings for the component
connected to the network.
Check the folder stored on the component
connected to the network.
If the client is automatically authorized, you need
to enter the corresponding information again.
Check whether the connection status is set to "Do
not authorize".
Check the audio files stored on the component
connected to the network.
Check whether the audio file was recorded in a
format supported by this receiver.
Check whether the folder has been damaged or
corrupted.
Note that there are cases where even the audio
files listed as playable on this receiver cannot be
played back or displayed (page 73).
Connect the LAN cable properly (page 67).
Use 100BASE-TX to access the components on
the network.
Instead of logging onto the domain, log onto the
local machine (page 69).
Check the firewall settings for components on the
network.
the network, and consult with your network
service provider if necessary (page 74).
There are cases where you cannot listen to some
Internet radio stations even when they are listed in
the list of Internet radio stations on this receiver
(page 70 and 125).
Press HOME MEDIA GALLERY to set the remote
control to the Home Media Gallery mode
(page 69).