Remote Control Mode Setup; Flicker Reduction Setup - Pioneer sc-9540 Operating Instructions Manual

12 The system and the other setup
1 Select 'Volume Limit Setup' from the Other Setup
menu.
4d.Other Setup
A/V RECEIVER
1. KURO LINK Setup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup

6. Remote Control Mode Setup

7. Flicker Reduction Setup

Exit
2 Select the Volume Limit setting you want.
• OFF – The maximum volume is not limited.
• –20.0dB/–10.0dB/0.0dB – The maximum volume is
limited to the value set here.
3 When you're finished, press RETURN.
You will return to the Other Setup menu.
Remote Control Mode Setup
• Default setting: 1
This sets this receiver's remote control mode to prevent
erroneous operation when multiple units of the receiver
1
are being used.
1 Select 'Remote Control Mode Setup' from the
Other Setup menu.
4d.Other Setup
A/V RECEIVER
1. KURO LINK Setup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
Exit
2 Select the Remote Control Mode setting you want.
3 Select "OK" to change the remote control mode.
4 Follow the instructions on the screen to change the
remote control's setting.
See Operating multiple receivers (page 89).
5 When you're finished, press RETURN.
You will return to the Other Setup menu.
Flicker Reduction Setup
• Default setting: 4
The GUI screen's resolution can be increased. If you feel
the GUI screen is hard to see, try changing this setting.
Note that the resolution in this setting only affects the
GUI screen; it has no influence on the video output.
Note
1 If you change this receiver's setting, also change the setting on the remote control.
114
en
4d5.Volume Limit Setup
A/V RECEIVER
Volume Limit : OFF
Return Exit
4d6.Remote Control Mode Setup
A/V RECEIVER
Remote Control Mode : 1
OK
Return Exit
1 Select 'Flicker Reduction Setup' from the Other
Setup menu.
4d.Other Setup
A/V RECEIVER
1. KURO LINK Setup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
Finish Exit
2 Select the Flicker Reduction setting you want.
3 When you're finished, press RETURN.
You will return to the Other Setup menu.
Cancel
4d7.Flicker Reduction Setup
A/V RECEIVER
Flicker Reduction : 4
Return Exit Finish