Basic Function Instruction; Power On/Off; Power On; Power Off - Provision ISR H.264 4/8/16/32-channel digital video recorder User Manual

3.1 Power On/Off

Before you power on the unit, please make sure all the cables are connected properly.

3.1.1 Power on

Step1: Plug in the power; switch on the power button (16-channel DVR only)
Step2: The device will start loading, and the power indicator will have blue color.
Step3: Before loading the camera view, a WIZZARD window will be pop-up and you could change the time zone, time setup,
network configuration, record configuration, disk management and more. User may or may not perform initial setup here or
perform the setup from the menu as described on the relevant chapters. The setup Wizard is optional, to skip this step click on
the "Exit" button. To disable the wizzard mark the option "startup wizzard" on the first page of the startup.
Notice: this serial device displays the menu either on VGA monitor or on the BNC monitor. To switch between the two outputs
press the "ESC" button until you hear a long beep.
If there is no display or you can only see the cameras without the main menu after clicking the right button on the mouse press
the "esc" button until a beep sounds. The VGA and video out (BNC) displays will switch.

3.1.2 Power off

You can power off the device by using remote controller, keyboard or mouse.
By remote controller: Press the "Power" button, the Shut down window will appear, click "OK", the unit display a message on
the screen, "it is now safe to unplug the
By keyboard and mouse:Step1: enter
will appear, click OK, the unit display a message on the screen, "it is now safe to unplug the DVR". Now you may disconnect the
power line.
Digital Video Recorder User Manual
3

Basic Function Instruction

DVR". Now you may disconnect the power line.
into Menu, then select "System Shut Down" icon, the Shut down window
24