Disk Management; Upgrade; Logoff - Provision ISR H.264 4/8/16/32-channel digital video recorder User Manual

6.3 Disk management

1 1 1 1 . . . .
Format the disk
Go to "disk management"
Note: please format the hard disk before starting a recording. If the disk is not formatted, it will show the status of
the disk-free space, and total space show OM at the bottom of screen and the DVR will not record.
Clicking the "Refresh" button will refresh the disk information in the list. To set the property of a disk click Apply. To format a
hard disk, select a hard disk from the list and then click the "Format" button.
Note: all recorded files in the hard disk will be lost after formatted.
2 2 2 2 . . . .
Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature,
internal circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.

6.4 Upgrade

At present, the DVR only supports update via USB. Download the software from your vendor and make sure it matches the
DVR. You can check the USB information in Disk management; the USB must be recognized and formatted (FAT32).
Upgrade method: the user needs to copy the upgrade software into the USB storage device and then connect it to the
USB port. Enter Menu Upgrade, the upgrade software name is displayed in the upgrade list box, select that software and
then click upgrade button. It will upgrade automatically. Never disconnect the power line during backup! Please wait for a
while when the system is rebooted.

6.5 Logoff

Click Log off icon, a log off dialogue box will popup, click OK button, the device will log off. If user wants to log in again,
click icon to enter into user name and password to re-login.
Digital Video Recorder User Manual
64