Table of Contents
Advertisement
Digital Video Recorder User Manual
Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input user
name and password correctly, and enter to view.
Note: If you cannot download and install ActiveX, please refer to Q&A.
2. Connect the DVR to internet directly.
Step 1: Enter into the DVR's Main Menu Setup Network interface to enable PPPoE and then input user name and
password received from your ISP. Next, click 'Apply'. The DVR will connect to the server and would give a confirmation
message.
Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main
menu Information Network interface to check IP address). The browser will download Active X control
Step 3: The following setting steps are as the same as Step4, Step 5 and Step 6 in Point 1.
Fig 7-1 View with IE browser
66
- Quick Links:
- Main Features
- Dvr Introduction
- Reset
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the H.264 4/8/16/32-channel digital video recorder and is the answer not in the manual?