Control With Mouse; Connect Mouse; Use Mouse - Provision ISR H.264 4/8/16/32-channel digital video recorder User Manual

Digital Video Recorder User Manual

2.5 Control with Mouse

2.5.1 Connect Mouse

The DVR supports USB mouse through the ports on the rear panel, please refer to Fig 2.8.
Notice: If mouse is not detected or doesn't work:
1. Make sure the mouse is plugged to the correct USB mouse port not the USB port 2. Replace the mouse

2.5.2 Use Mouse

In live:
Double-click (left button) on one camera screen for full screen display. Double-click again to return to the previous screen display.
Click right button to show the control bar at the bottom of the screen. Here are all control and setup. Click right mouse again to hide
the control bar.
In setup:
Click left button to enter or accept. Click right button to cancel, or to return to the previous menu. To input a value, move cursor to
the blank area and click left button once. An virtual keyboard will appear as in Fig2.9. It supports digitals, letters and symbols input.
Some values can be modified by the wheel, such as time. Move the cursor above the
value, and roll the wheel to change the value.
Mouse drag; I.e. Set motion detection area: click customized, hold and drag to set
motion detection area. Set schedule: hold and drag left button to set schedule time
In playback or backup:
Click left button to choose the options. Click "X" button to return to live mode.
In PTZ control: Fig 2.9 virtual keyboard
Click left button to choose the buttons to control the PTZ. Click right button to return to live.
Notice: Mouse is the default tool in all the operation below unless indicated otherwise.
23