Spot; Mask - Provision ISR H.264 4/8/16/32-channel digital video recorder User Manual

Click button to set the next channel group.
Step5: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit current
interface.

4.2.3 Spot

Step1: enter into system configuration live configuration Spot; refer to Fig 4-9:
Step2: select split mode: 1×1and channel
Step3: dwell time: the time interval for a certain dwell
picture display switching to next dwell picture display
Step4: select the split mode and then setup current
picture group. Click
channel groups of dwell picture. Click
the latter channel groups of dwell picture.
Reset default setting; click the "default" button and then
"apply" button to save the setting. Press the "exit" button
to exit current interface.

4.2.4 Mask

You can add up to three privacy mask areas on the live
image picture, to block view and recording.
Setup mask area: click setting button, enter live image
and press left mouse to create or move a privacy mask,
refer to the picture on the next page. Press the "Apply"
button to save your setting.
Delete mask area: double click on the mask area you
want to delete. Click Apply button to save the setting.
Digital Video Recorder User Manual
button to setup the previous
button to set
Fig 4-9 live configuration-Spot
Fig 4-10 live configuration-mask
32