Operation; Main Menu - Walchem WBL400 Series Instruction Manual

5.0

OPERATION

These units control continuously while power is applied. Programming is accomplished via the local
keypad and display.
To view the top level menu, press any key. The menu structure is grouped by inputs and outputs. Each
input has its own menu for calibration and unit selection as needed. Each output has its own setup menu
including set points, timer values and operating modes as needed. After ten minutes of inactivity in the
menu, the display will return to the summary display. Keep in mind that even while browsing through
menus, the unit is still controlling.
5.1

Main Menu

The exact configuration of your WBL controller determines which menus are available as you scroll
through the settings. Certain menus are only available if you select certain options. All settings are
grouped under the following main menu items.
Conductivity
Temperature
Blowdown
Feed
Aux 1-4
Time
Alarm
4-20mA
Access Code
Datalog
Config
Upgrade
The key travels forward through this list while the
NEXT
Pressing
ENTER
Only if model number is WBL400
Only if model number is WBL410
Only if 4-20mA option installed
Only if advanced USB feature is in model code
Only if advanced USB feature is in model code
will Enter the lower level menu that is currently displayed.
key travels backwards through the list.
PREV
15