Panasonic DBS 576 User Manual page 12

1. Understanding Your Phone
# Feature
5
Soft Keys
PROG Key
6
CONF Key
7
One-Touch Keys
8
Flexible Function (FF)
9
Keys
DND/CF Indicator
10
MUTE Indicator
11
EXT Indicator
12
13
ON/OFF Indicator
14
REDIAL Key
MUTE Key
15
16
AUTO Key
ON/OFF Key
17
FLASH Key
18
VOLUME Key
19
HOLD Key
20
Microphone
21
22
Speaker
Note: * and # keys are used to scroll through SSD's, PSD's, and
12
Used to select speed dial directories or numbers.
Used to program Flexible Function (FF) and one-
touch keys, to adjust ringer volume, and to send a
flash signal. Depending on the setup of your sys-
tem, may also be used to transfer calls.
Used to establish conference calls and to check FF
key and one-touch features.
Used to make outside calls or to access system fea-
tures.
Used to access outside lines or to access system fea-
tures.
Indicates that Do-Not-Disturb (DND) or Call For-
warding is set.
Indicates that your voice is muted (i.e., party on the
other end cannot hear you). Lights solid when your
hands-free microphone is muted and flashes when
your handset is muted.
Lights when you are on a call and flashes when you
hold a call.
Lights when the ON/OFF key has been pressed.
Used to redial the last number dialed.
Used to activate/deactivate the Mute function.
When activated, the party on the other end cannot
hear you. (See item 11, MUTE Indicator.)
Used to access speed dialing or enter account codes.
Used to make a call without lifting the handset or to
turn the speaker on and off.
Used to end an outside call and to either restore out-
side dial tone or switch to external dial tone status
without hanging up the receiver.
Used to adjust the level of tones, background
music, ringing, receiver volume, and display con-
trast.
Used to hold calls, to retrieve held calls, and to
complete FF key programming.
Used to talk to another party without using the
handset.
Outputs tones and voice at your extension.
DBS 576 issued March 2001
Description
extensions.
576-40-750