Panasonic DBS 576 User Manual page 45

The Year (two characters), Month (two characters),
3. Enter:
and Day (two characters)
Note: Press the FLASH key to clear any existing data.
The Hour (two characters) and Minute (two
4. Enter:
characters)
Note: Press the FLASH key to clear any existing data.
The Day of Week
5. Enter:
1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,
0 = Sun
HOLD
and press
Note: Press the FLASH key to clear any existing data.
AUTO PROG
6. Press
OR...
AUTO ON/OFF
Press
Text Message Replies
To create Text Message Replies using either a large-
display or small-display phone:
1. Enter "User Maintenance" by pressing:
11
2. Enter: , press
HOLD
3. Press , enter:
Text Message (up to 15 characters)
4. Enter:
• If using a large-display phone, press the soft key next to the desired row of letters.
• If using a small-display phone press the appropriate one-touch key.
Note: Press the FLASH key to clear any existing data.
5. Use the bottom row of FF keys to select a single letter.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired Text Message
HOLD
and press
Note: Press the FLASH key to clear any existing data.
576-40-750
and press
HOLD
and press .
where:
to store the entry.
to return to "81-User Maintenance" (step 1 above).
to exit User Maintenance.
HOLD 1
, enter: , and press
Message Number (0-9)
to store the entry.
DBS 576 issued March 2001
2. Setting Up Your Phone
HOLD
.
ON/OFF PROG * * CONF
HOLD
.
, and press
:
.
HOLD
.
45