Panasonic DBS 576 User Manual page 39

To set the Exception Day Modes using either a large-
display or small-display phone:
1. Enter "User Maintenance" by pressing:
07
2. Enter: , press
Start Date by Month - two characters and Day - two
3. Enter:
characters
Note: To clear an entry or existing data, press the FLASH key.
4. To set additional Exception Day modes, press the
HOLD
arrow or
5. Repeat steps 4-5 until the remaining days in the month are set.
AUTO PROG
6. Press
OR...
AUTO ON/OFF
Press
To set the Mode Schedule using either a large-display or
small-display phone:
1. Enter "User Maintenance" by pressing:
07
2. Enter: , and press
Start Time in Hours (two characters) and Minutes
3. Enter:
(two characters)
Notes: To clear an entry or existing data, press the FLASH key.
Desired Mode for Pattern 1 - first (0 - None, 1 - Day 1,
4. Enter:
2 - Day 2, 3 - Night, 4 - Night 1, 5 - Night 2
store the entry.
Note: To clear an entry or existing data, press the FLASH key.
5. To set additional mode schedules, press the
HOLD
to move to the desired mode.
6. Repeat steps 3-5 until all patterns and modes are set. (There are 3 total patterns
with 5 start time/modes each.)
Note: Entry Positions are listed in Chapter 4 of Section 700 - Feature Operations.
AUTO PROG
7. Press
OR...
AUTO ON/OFF
Press
576-40-750
HOLD 2
, enter: , and press
for Exception Period 1 and press
to move to the desired mode.
to return to "81-User Maintenance" (step 1 above).
to exit User Maintenance.
HOLD HOLD HOLD
for Pattern 1 - first mode and press
to return to "81-User Maintenance" (step 1 above).
to exit User Maintenance.
DBS 576 issued March 2001
2. Setting Up Your Phone
ON/OFF PROG * * CONF
HOLD HOLD
HOLD
to store the entry.
VOLUME
ON/OFF PROG * * CONF
.
HOLD
) and press
VOLUME
up or down arrow or
.
up or down
.
HOLD
to
39