Using Do-Not-Disturb - Panasonic DBS 576 User Manual

To send a Message Waiting/Callback request
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number.
3. While the phone is still ringing or when you hear the busy tone, enter the
Message Wait code (default = 4). (The message lamp flashes at the called
extension.) (Note: You may need to dial 1 to change to tone calling before
sending the message.)
4. Replace the handset or press the ON/OFF key.
To respond to a Message Waiting/Callback request
Note: Multiple messages are accessed in the order in which they are received.
1. Pick up the handset or press the ON/OFF key.
2. Do one of the following:
To . . .
Answer a callback request
* Cancel a Message Waiting/
Callback request
* Only the person receiving a Message Waiting/Callback request can cancel the request. (The
sender of a callback request cannot cancel the request once it has been sent.)
3. Replace the handset or press the ON/OFF key.

USING DO-NOT-DISTURB

Use DND to temporarily stop calls from coming to your extension.
576-40-750
Enter the Message Wait/Callback Set code (
*6
). Or, if using a large-display phone, press the MSG
key.
OR...
Press the Flexible Function (FF) Key assigned as a
Message Callback Key.
• Phone automatically dials the extension that sent
the callback request
• Message lamp goes off when the call is answered
Enter the Cancel Message Waiting/Callback code
default = *5
( ).
DBS 576 issued March 2001
5. Communicating Within Your Office
Do . . .
default =
75