Table of Contents
Advertisement
2
PANEL DESCRIPTION
I Function display
q
BUSY
w
25W
e
TAG
r
CALLING
q BUSY/TRANSMIT INDICATOR (p. 8)
➥ "BUSY" appears when receiving a signal or when the
squelch opens.
➥ "TX" appears while transmitting.
w POWER INDICATOR (p. 8)
➥ "25W" appears when high power is selected.
➥ "1W" appears when low power is selected.
e TAG CHANNEL INDICATOR (p. 13)
Appears when a tag channel is selected.
4
o
i
INT
CALL
SC
DUP
t y
r CHANNEL NAME INDICATOR
➥ Channel comment appears if programmed. (p. 9)
➥ "Low Battery" appears when the battery voltage drops
to approx. 10 V DC or below.
➥ "DUAL" appears during dualwatch; "TRI" appears dur-
ing tri-watch. (p. 11)
t SCRAMBLER INDICATOR (p. 11)
u
Appears when the optional voice scrambler is activated.
y DUPLEX INDICATOR
Appears when a duplex channel is selected.
u CHANNEL NUMBER READOUT
➥ Indicates the selected operating channel number. "A"
appears when a simplex channel is selected. (p. 6)
➥ In set mode, indicates the selected condition. (p. 14)
i CHANNEL GROUP INDICATOR (p. 6)
Indicates whether an International, U.S.A., Holland, DSC
or ATIS channel is selected.
• Available channel groups depend on version.
o CALL CHANNEL INDICATOR (pgs. 6, 9)
Appears when a call channel is selected.
Advertisement
Table of Contents
