Usb Tape Drive - HP ProLiant ML310 Generation 5p User Manual

Install the optical drive.
5.
Connect the power cable to the rear of the drive.
6.
Connect the optical drive cable to the rear of the optical drive and to the optical drive cable connector
7.
on the system board.
Remove the applicable bezel blank from the bezel
8.
Install the access panel (on page 18).
9.
Install the bezel.
10.
Power up the server (on page 16).
11.

USB tape drive

For clarity, the following illustrations include option cabling only.
("Remove a bezel blank" on page 19).
Hardware options installation 32