Install the hard drive.
4.
Determine the status of the drive from the hot-plug SAS hard drive LED combinations
5.
SAS hard drive
Install the bezel.
6.
Resume normal server operations.
7.
SATA optical drive
For clarity, the following illustrations include option cabling only.
CAUTION:
all bays are populated with either a component or a blank.
To install the component:
Power down the server (on page 16).
1.
Remove the bezel (on page 17).
2.
Remove the access panel (on page 18).
3.
Remove the applicable media bay blank
4.
LEDs" on page 8).
To prevent improper cooling and thermal damage, do not operate the server unless
("Remove a media bay
blank" on page 19).
("Hot-plug SATA or
Hardware options installation 31