Registering The Server - HP ProLiant ML310 Generation 5p User Manual

•
Manual installation—Insert the operating system CD into the CD-ROM drive and reboot the server. This
process may require you to obtain additional drivers from the HP website
(http://www.hp.com/support).
Follow the on-screen instructions to begin the installation process.
For information on using these installation paths, refer to the SmartStart installation poster in the HP ProLiant
Essentials Foundation Pack, included with the server.
For embedded SATA RAID configuration, the administrator must create a driver diskette and perform a
manual OS installation.
To install the embedded SATA RAID driver during OS installation, see "Installing an operating system
(Embedded SATA RAID) (on page 55)."

Registering the server

To register the server, refer to the HP Registration website (http://register.hp.com).
Setup 27