SPECIFICATIONS - MODEL NO. OZDS280WA Motor size: 280W Input: 230 - 240V ~ 50Hz No load speed: 6,000 - 10,000/min Weight: 1.4kg Features: Ergonomic design Dust Extraction Adaptor Hook & loop Soft grip handle This Detail Sander has been designed to comply with the following Australian/ New...
The electric motor has been designed for 230V and 240V only. Always power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tool is double insulated in accordance with AS/NZS60745;...
GENERAL SAFETY INSTRUCTIONS Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “Power Tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
Page 6
GENERAL SAFETY INSTRUCTIONS (cont.) d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Page 7
ADDITIONAL SAFETY INSTRUCTIONS FOR DETAIL SANDERS Unplug the sander before changing accessories. Accidental start-ups may occur if the sander is plugged in while changing an accessory. Disposing of dust. Be extremely careful of dust disposal, materials in fine particle form may be explosive. Do not throw sanding dust on an open fire. Spontaneous combustion, may in time, result from a mixture of oil or water with dust particles.
TOOL OPERATION BE SURE TO DISCONNECT THE DETAIL SANDER FROM THE POWER SUPPLY BEFORE INSTALLING OR REMOVING THE SANDING BELTS Attaching Sanding Sheet (Fig. 1) Fig. 1 The hook & loop baseplate (3) is covered with Velcro material. The sanding sheet (4) can therefore be quickly and simply attached with Velcro fastening.
Page 9
TOOL OPERATION (cont.) Switch operation (Fig. 3) Fig. 3 To start the tool, push the ON/OFF switch (1) forward to "1" position. To switch off the tool, push the ON/OFF switch (1) backward to "0" position. Selecting the variable speed (Fig. 4) Fig.
Note: Ozito Industries will not be responsible for any damage or injuries caused by repairing of the sander by an unauthorised person or by mishandling of the tool.
Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Detail Sander OZDS280WA 3 x Sanding sheets 1 x Operation manual 1 x Dust extraction adaptor OZITO INDUSTRIES PTY LTD...
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.