The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
GENERAL SAFETY INSTRUCTIONS Warning! Read all instructions, Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “Power Tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
Page 6
GENERAL SAFETY INSTRUCTIONS (cont.) d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Page 7
ADDITIONAL SAFETY INSTRUCTIONS FOR POLISHERS a) This power tool is intented to function as a polisher. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Page 8
ADDITIONAL SAFETY INSTRUCTIONS FOR POLISHERS (cont.) Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control. m) Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body.
TOOL OPERATION Before commencing polishing operation, carry out test on an inconspicuous part of the surface to be polished. Application 1. Install a clean application bonnet (8) on the foam pad (3) as shown in Fig. 1. 2. Follow the manufacturer's instructions on applying the polish to be used.
Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Buffer Polisher OZBP110WA 1 x Polishing Bonnet 1 x Applicator Bonnet 1 x Instruction Manual OZITO INDUSTRIES PTY LTD...
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.