Refitting The Rear Wheel; Swing-Arm - Gilera Fuoco 500 Service Station Manual

Fuoco 500 i.e.
- Collect the conical spacer.
- Undo the five wheel fixing screws and remove the
wheel.

Refitting the rear wheel

To fit, proceed in the reverse sequence from that
used for the removal, being careful to fit the dis-
tances on the wheel axle as shown in the photo-
graph.
Locking torques (N*m)
Muffler arm clamping screws 27 ÷ 30 Rear
wheel axle nut 104 ÷ 126 Shock absorber-
crankcase attachment bracket 20 ÷ 25 Lower
shock absorber clamping screw 33 ÷ 41 Nm
Rear brake calliper fixing screws 25 ÷ 30 Nm

Swing-arm

Removal
- Rest the scooter on its centre stand.
- Remove the retainer fixing the swinging arm to
the engine, unscrew the nut and remove the bolt.
Suspensions
SUSP - 47