Table of Contents
Advertisement
More SMS commands
You can configure MT80i by mobile phone or by computer using the MEITRACK Parameter Editor.
For more details, please refer to part 6.5 Configure by Computer.
Note:
Password is 4 digits only and defaulted as 0000. You can change the password by Parameter Editor and SMS
1.
command.
2.
MT80i will only accept commands from a user with the correct password and report SMS report to the user.
If preauthorized phone number was set, only this phone number can receive SMS reports.
6.4.1 Multiple Phone numbers– A71
Command: 0000, A71, phone number 1, phone number 2, phone number 3
SMS Get: IMEI, A71, OK
Note：
Authorize a phone number for SOS alarm, calling for location report, geo-fence alarm, and low battery alarm.
Phone Number: Max 16 characters.
If no preset phone number, it is empty (default is empty).
Send command "0000, A71" to delete all phone numbers.
When the SOS button is pressed, MT90 will make a call to phone number 1, 2 and 3. It will stop calling when one
number answers.
Example: 0000,A71,13811111111,13822222222,13833333333
SMS Get: 353358017784062,A71,OK
6.4.2 Listening-in (Voice Monitoring)– A72
Command: 0000, A72, phone number 1, phone number 2
SMS Get: IMEI, A72, OK
Note:
Copyright © 2012 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
File Name:
MEITRACK MT80i User Guide
Project:
MT80i
Sub Project:
User Guide
Revision:
V2.2
Creator:
Cavana Cheung
Creation Date:
Update:
Page:
Confidential:
External Documentation
2010-10-10
2012-07-03
- 7 - of 15
- 7 -
Advertisement
Table of Contents
