Table of Contents
Advertisement
Event Description:
Event
SOS/Input 1 Active
SOS/Input1 Inactive
Low Battery
Speeding
Enter Geo-fence
Exit Geo-fence
No GPS Signal
Get GPS Signal
Enter Sleep
Exit Sleep
Device Reboot
Distance Interval Report
Press Input 1 (SOS) to call
Reject Incoming Call
Call for SMS Location Report
Listen-in (Voice Monitoring)
6.5.2 GPRS Tracking
Click Tap II: GPRS Tracking
Copyright © 2012 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
File Name:
MEITRACK MT80i User Guide
Project:
MT80i
Sub Project:
User Guide
Revision:
V2.2
Description
(If the box is ticked, authorized phone number will get event report
by SMS or calling)
Report when input1 (SOS) is pressed.
Report when input 1 inactive (SOS released).
Report when backup battery's voltage is below 3.5V.
Report when MT80i speeds higher than the pre-set value.
Value can be changed on tap III Main Settings
Report when MT80i enters Geo-fence.
Report when MT80i exits Geo-fence.
Geo-fence can be changed on tap III Main Settings.
Report when MT80i enters GPS blind area or no GPS signal.
Report when MT80i exits GPS blind area or get GPS signal.
Report when MT80i enters sleep mode.
Report when MT80i exits sleep mode.
Sleep mode can be changed on tap III Main Settings.
Report when MT80i is rebooting.
Track by distance.
Interval can be changed on tap III Main Settings.
Make a call to authorized phone number when press input 1 (SOS).
Hand up automatically incoming call from correspondent authorized
phone number.
Reject incoming call or report SMS location when no answer.
Auto answer incoming call and enable listen-in (voice monitoring).
Creator:
Cavana Cheung
Creation Date:
Update:
Page:
Confidential:
External Documentation
2010-10-10
2012-07-03
- 13 - of 15
- 13 -
Advertisement
Table of Contents
