Effect Functions; Switching On Effects; Playing Samples; Scratch Effects - Omnitronic TMC-02 User Manual

Usb-midi-controller
Table of Contents

Advertisement

Available languages

Available languages

8. EFFECT FUNCTIONS

8.1 Switching on effects

1. Select the desired effect by pressing the button EFFECT SELECTOR repeatedly. The display of the
deck shows the selected effect.
Effect
Backspin
Flanger
Beat Grid
Flippin Double
Brake
Key Changer
Echo
Vocals+
Filter
2. Press the button EFFECT ON (LED lights up) to switch on the selected effect. In the display, the selector
panel is highlighted red. To switch off the effect press the button once again (LED extinguishes).
3. Adjust the parameters of the effects as desired with the control PARAMETER 1 and 2.

8.2 Playing samples

There are six preset samples available which can be combined as desired. The software allows you to
record your own samples and assign them to the other six storage places. For this click the button REC and
adjust the desired length with the arrow buttons.
1. Turn the control SAMPLE SELECTOR to select the desired sample. The corresponding LED lights up
red.
No.
Sample
1
Siren
2
Saxo
3
Put your hands up
4
Push
5
Pump it up
6
This this this
7-12
Freely assignable
2. Press the control to play the sample. In the display, the selector panel is highlighted green. The sample
is played until you press the control once again. If required, further samples can be activated and played
in the same way.
3. Adjust the level of the sampler unit with the control SAMPLER VOLUME. Via the software's arrow
buttons, the sample length can be adjusted by half length or double length increments.
4. The button SAMPLER PLAY can be used for stutter effects. By shortly pressing the button several times,
the sample selected last is restarted, creating stutter effects.

8.3 Scratch effects

Press the button SCRATCH (LED lights up) to switch on the scratch function for the jogdial. Turn the jogdial
back and forth to create scratch effects. To switch off the function press the button SCRATCH once again
(LED extinguishes).

8.4 Droning effects

The jogdial can also be used for droning effects. The scratch function, the fast search and the master tempo
function must not be activated. Turn the jogdial back and forth to increase or reduce the playing speed,
generating a droning effect.

8.5 Stutter effects

The cue points stored with the buttons HOT CUE 1 to 3 as well as the button
stutter effects. Shortly press one of the buttons to create a stutter effect.
47/50
can be used for creating
00053493.DOC, Version 1.0

Advertisement

Table of Contents
loading

Table of Contents