Crossfading Between The Decks; Announcements Via The Dj Microphone; Prefader Listening To The Channels; Fast Forward And Reverse - Omnitronic TMC-02 User Manual

(control LOW) can be boosted or substantially attenuated. With the controls in mid-position, the
frequency response is not affected. Sound adjustments affect the level. Readjust the channel level with
the gain control, if necessary.
5. Adjust the low frequencies for the output signal at the balanced master output with the control BASS
LEVEL.
6. Adjust the definite level of the output signal at the master outputs with the controls MASTER CONTROL
and MASTER LEVEL.
7. Adjust the desired signal level for the output BOOTH with the control BOOTH VOLUME.
8. The recording signal at the recording output REC is taken off ahead of the output controls, i.e. it is not
affected by the controls MASTER CONTROL, MASTER LEVEL and BOOTH VOLUME.

7.4 Crossfading between the decks

1. The crossfader allows crossfading between both decks:
• crossfader moved to the left: fade-in of Deck A and fade-out of Deck B
• crossfader moved to the right: fade-in of Deck B and fade-out of Deck A
• for hearing the signals of the two decks at the same level, set the crossfader to mid-position
2. The characteristic of the crossfader can be adjusted with the control X-FADER CURVE:
• left position: smooth crossfading (gradual transition ) e.g. for long mixes
• right position: sharp crossfading (abrupt transition) e.g. for scratching and cutting.
CAUTION! Do not use the control X-FADER CURVE while a signal is present as this may cause a sudden change
in volume.

7.5 Announcements via the DJ microphone

Announcements via the DJ microphone are directly mixed to the master signal. Use the control MIC LEVEL
to adjust the desired volume.

7.6 Prefader listening to the channels

The cue function allows monitoring each of the decks via headphones even if the corresponding channel is
faded out. Thus, it is possible, e. g. play the beginning of a title, to set a cue point, or to adjust a continuous
loop without the audience listening in. Alternatively it is possible to monitor the current music program ahead
of the controls MASTER CONTROL and BOOTH VOLUME.
1. Use the cue mode selector switch to select the cue mode for the headphones:
• position CUE: The prefader level of Deck A is on one side and the prefader level of Deck B is on the
other side of the headphones.
• position SPLIT: The prefader level (mono) is on one side and the master signal (mono) is on the other
side of the headphones.
2. Use the control CUE to select and crossfader the monitoring signal for the headphones:
• mode CUE: Turn the control to the left to monitor Deck A, turn the control to the right to monitor Deck B.
In mid-position, both decks can be heard at the same volume.
• mode SPLIT: Turn the control to the left to monitor the prefader level, turn the control to the right to
monitor the master signal. In mid-position, both signals can be heard at the same volume.
3. Adjust the desired headphones volume with the control CUE LEVEL.

7.7 Fast forward and reverse

For fast forward and reverse first activate the search function for the jogdial by shortly pressing the button
SEARCH (orange LED lights up). Then turn the jogdial in the corresponding direction.
In order to quickly jump to a certain spot in the title, click on the corresponding position in the signal diagram
or in the position ring around the turntable platter.
44/50 00053493.DOC, Version 1.0