Playing A Title; Basic Adjustment Of The Mixer - Omnitronic TMC-02 User Manual

7.2 Playing a title

1. Press the button
00:00) or click the right mouse button over the button
beat.
2. Pressing the button
creating a stutter effect.
3. Press the button
cycle through the starting point of the title and all cue points (
4. The unit stops at the end of the title. However, the title remains in the deck until another title will be
loaded.

7.3 Basic adjustment of the mixer

1. For basic adjustment set the master controls MASTER CONTROL and MASTER LEVEL, the crossfader
and in both channels the controls GAIN and the equalizers to mid-position.
2. Advance the two channel faders approx. to 2/3 of the maximum for sufficient way for fading in and out.
3. Play a title with Deck A and control the deck with the respective gain control according to the level
indication. An optimum level control is obtained if level values in the 0 dB range are shown at average
volume. If the red LEDs of the output meter light up, there is an overload of the channel. Stop the
playback on Deck A and adjust Deck B in the same way.
4. Adjust the desired sound with the tone controls of the channel. By adjusting the three tone controls, the
high frequencies (control HIGH), the midrange frequencies (control MID), and the low frequencies
Virtual DJ
(blue LED lights up) to start playback from starting point of the title (time index
several times in play mode, will restart the title from the current position,
to interrupt playback (green LED lights up). Pressing the button several times will
Virtual DJ
to start the title from the first detected bass
s. section 7.8).
TMC-02
43/50
TMC-02
00053493.DOC, Version 1.0