Omnitronic TMC-02 User Manual page 33

27 Power indicator
28 Buttons SEARCH and SCRATCH
Determine the operating mode of the jogdials:
• button SEARCH: switches fast forward and reverse on
and off
• button SCRATCH: switches the scratch function on
and off
31
Headphones inputs
6.3 mm and 3.5 mm jacks HEADPHONE 1 and 2 for
connecting stereo headphones (impedance X8
32 Control CUE LEVEL
Level control for headphones connected to the jacks
HEADPHONE 1 and 2.
33 Control CUE
For selecting and crossfading the monitoring signal for
the headphones depending on the cue mode selector
switch:
• mode CUE: The prefader level of Deck A and Deck B is
monitored.
• mode SPLIT: The prefader level and the master signal
is monitored.
34
Cue mode selector switch
For selecting the monitoring mode for the headphones:
• position CUE: The prefader level of Deck A is on one
side and the prefader level of Deck B is on the other
side of the headphones.
• position SPLIT: The prefader level (mono) is on one
side and the master signal (mono) is on the other side
of the headphones.
29 LED level meter L/R
6-digit LED meter of the stereo master signal within the
range of -13 dB to +3 dB.
30 Button FOLDER SELECT
To activate the browser section and to jump back to the
main directory.
35
Control X-FADER CURVE
Adjusts the characteristic of the crossfader:
• left position: smooth crossfading (gradual transition)
).
e.g. for long mixes
• right position: sharp crossfading (abrupt transition)
e.g. for scratching and cutting.
Do not use this control while a signal is present as this may
cause a sudden change in volume.
36
Control MIC LEVEL
Level control for DJ microphones connected to the jacks
MIDI MIC.
37 Microphone inputs MIDI MIC
Input jacks for connecting DJ microphones via XLR or a
6.3 mm plugs.
33/50 00053493.DOC, Version 1.0