System Requirements; Installing Epson Barcode Fonts - Epson EPL-N2700 Reference Manual
Laser printer
Hide thumbs
Also See for EPL-N2700:
- Service manual (200 pages) ,
- Getting ready (50 pages) ,
- Quick reference manual (34 pages)
Table of Contents
Advertisement
System requirements
To use EPSON BarCode Fonts, your computer system should
meet the following requirements.
Printer:
Computer:
Operating system: Microsoft Windows 95, 98, NT 3.5x, NT 4.0
Hard disk:
Printer driver:
Note:
EPSON BarCode Fonts can only be used with EPSON printer drivers.
Installing EPSON BarCode Fonts
Follow these steps to install EPSON BarCode Fonts. The
procedure described here is for installation in Windows NT 4.0;
the procedure for other Windows operating systems is nearly the
same.
1. Turn on the computer and start Windows.
2. Insert the CD-ROM or floppy disk containing the BarCode
Fonts into the appropriate drive.
3. Click Start, point to Settings, then click Control Panel.
4. Double click Fonts.
D-8
Working with Fonts
EPSON EPL-5700/EPL-N1600/EPL-N4000/
EPL-C8000/EPL-N2700 or later products
IBM PC series or IBM compatible with an
i386SX or higher CPU
15-30 KB free space (This differs depending
on the font.)
EPSON EPL-5700 Advanced, EPSON EPL-
N1600 Advanced, EPSON EPL-N4000
Advanced, EPSON EPL-C8000 Advanced,
EPSON EPL-N2700 Advanced or later driver
Advertisement
Table of Contents
