Gl2 Menu - Epson EPL-N2700 Reference Manual

Source SymSet, Dest SymSet
Available only in certain locations where printers are sold with a
special ROM module installed to handle specific languages.
CR Function, LF Function
These functions are included for users of particular operating
systems, such as Unix.

GL2 menu

This menu lets you set the printer to emulate a plotter, allowing
you to use software which requires a plotter for output. The
LJ4GL2 mode is similar to the GL/2 mode supported in HP
LaserJet 4 mode. The GLlike mode emulates some of the HP-GL
plotter commands and includes all the commands found in HP's
GL/2 mode, as well as two additional commands.
Item
GL Mode
Scale
Origin
Pen
End
Join
Pen 0 through 6
5-26
SelecType Settings
Values (default is in bold)
LJ4GL2, GLlike
Off, A0, A1, A2, A3
Corner, Center
Pen0, Pen1, Pen2, Pen3, Pen4, Pen5, Pen6
Butt, Square, Triangular, Round
Mitered, Miteredbeveled, Triangular, Round,
Beveled, None
0.05 ... 0.35 ... 5.00 mm in 0.05 increments