Advertisement
NOTE: When you replace the bottom case bracket, follow these guidelines to
prevent damage to the speaker wires:
‡
Orient each speaker in the bottom case so that its wires are facing
upwards.
‡
Route the speaker wires under their respective retaining clips on the
bottom case bracket.
0RGXOH/DWFK$VVHPEOLHV
plungers (2)
module latches (2)
module latches (2)
)LJXUH0RGXOH/DWFK$VVHPEOLHV5HPRYDO
1. Remove the bottom case bracket.
2. Remove the left latch from the outside of the bottom case by unsnapping
the slider-spring assembly.
Keep pressure applied to the slider-spring assembly while unsnapping the
latch to prevent the slider-spring assembly from coming loose from the
case. If the slider-spring assembly does come loose from the case:
a. Carefully reinsert the spring onto the plunger on the slider, and reinstall
the slider-spring assembly into the holding features on the inside of the
case.
module latch
assemblies (2)
springs (2)
Dell Latitude CPiA Service Manual
33
Advertisement
