Download Print this page

Dell LATITUDE cpia Service Manual page 34

Latitude cpia

Advertisement

26
Dell Latitude CPiA Service Manual
,QFK/&''LVSOD\V
LCD panel
interface cable
display-assembly top cover
)LJXUH/&'3DQHO5HPRYDO ,QFK'LVSOD\ 
1. Remove the display assembly bezel.
2. Remove the two 4.5-mm screws at the right corners of the LCD panel.
3. Use the yellow tab to lift the right side of the LCD panel, slide the LCD
panel to the right, and then pivot the panel up.
4. Disconnect the interface cable at the center-junction connector on the back
of the LCD panel.
&$87,21&DUHIXOO\SUHVVGRZQRQWKHORFNLQJWDEVDQGWKHQSXOO
WKHFRQQHFWRUDSDUW
Figure 19 shows the two-piece (A and B) cable layout for a 13.3-inch LCD
panel.
4.5-mm screws (2)
LCD inverter board
LCD panel
power cable

Advertisement

loading