Advertisement
4. Carefully disconnect the touch-pad cable from ZIF connector J1 on the
touch-pad interface module.
To release the ZIF connector latch, use a fingernail to lift up the central
portion of the black plastic latch.
5. Remove the touch-pad interface module from the palmrest.
3RZHU%XWWRQ
1. Remove the palmrest assembly.
2. Turn the palmrest assembly upside down on a flat work surface.
3. Compress the two catches securing the power button, and remove the
power button and spring from the palmrest assembly.
'LVSOD\$VVHPEO\
display assembly
black 5-mm display-
assembly interface-
cable grounding
screws (2)
display-assembly
interface cable
)LJXUH'LVSOD\$VVHPEO\5HPRYDO
5-mm screws (4)
hinges (2)
Dell Latitude CPiA Service Manual
21
Advertisement
