Advertisement
28
Dell Latitude CPiA Service Manual
/&''LVSOD\+LQJH
1. Remove the LCD display assembly from the computer.
2. Remove the display assembly bezel.
3. Remove the four silver 5-mm screws securing the two hinge brackets to
the display-assembly top cover.
NOTE: To aid in reinstalling the hinges and display assembly, the right and left
hinges are marked by an "R" and an "L," respectively. Install the four screws
securing the hinges at the locations marked by arrows on the face of each
hinge.
'LVSOD\$VVHPEO\7RS&RYHU
1. Remove the display assembly.
2. Remove the display assembly bezel.
3. Remove the LCD panel.
4. Remove the display assembly latch.
5. Remove the left and right hinges.
6. Remove the display-assembly interface cable.
%RWWRP&DVH$VVHPEO\
The bottom case assembly consists of the following field-replaceable
components:
‡
Modular bay device (diskette drive assembly, CD-ROM drive assembly, or
travel module)
‡
Back cover assembly
‡
Audio shield
‡
Audio board
‡
Bottom case bracket
‡
Module latch assemblies
‡
Speakers
‡
System board assembly
‡
Thermal cooling assembly
‡
Air flow duct
‡
Exhaust fan
‡
Infrared (I/R) board
‡
Reserve battery
Advertisement
