Download Print this page

Dell LATITUDE cpia Service Manual page 40

Latitude cpia

Advertisement

32
Dell Latitude CPiA Service Manual
%RWWRP&DVH%UDFNHW
left speaker
)LJXUH%RWWRP&DVH%UDFNHW5HPRYDO
1. Remove the back cover assembly.
2. Remove the keyboard assembly.
3. Remove the palmrest assembly.
4. Remove the 5-mm screw securing the audio shield and the 5-mm screw
securing the EMI drain wire.
5. Remove the audio board shield.
6. Disconnect the speaker wires from connectors JP1 and JP2 on the audio
board.
The connectors are fragile—do not pull on the speaker wires to disconnect
them.
7 . Remove the two 5-mm screws on the left side and one 5-mm screw on the
right side of the bottom case bracket.
8. Insert the end of a small flat-blade screwdriver into the slot in the vertical
support in the center of the bottom case, and disengage the plastic
retaining clip.
9. Lift the bottom case bracket from the computer.
left speaker wires
plastic retaining clip
slot
5-mm screws (3)
right speaker

Advertisement

loading