Advertisement
)LJXUH 7ZR3LHFH&DEOH/D\RXWIRUWKH,QFK/&'3DQHO
5. Disconnect the display-assembly interface cable from the ZIF connector on
the inverter that is located on the right side of the LCD panel.
To disconnect the cable, carefully work the cable connector free from the
ZIF connector on the LCD panel. Do not pull on the LCD interface cable
itself.
NOTES: When you replace the 13.3-inch LCD display, always replace the
display assembly bezel with the new one that comes with the LCD display.
If you need to replace the bottom LCD cable on the 13.3-inch display, use one
bend to route the new cable to the inverter board connector.
If you need to replace the bottom LCD cable on the 12.1-inch display, use two
bends to route the new cable to the inverter board connector.
LCD B cable
(stays with LCD panel)
center-junction
connector
LCD A cable
interface
connector
Dell Latitude CPiA Service Manual
inverter
connector
27
Advertisement
