Feature Menu - Hornet 725T Installation Manual

Valet/Program switch. If this is not the desired setting, continue to hold the Valet/Program switch and press the
arm/disarm button on the transmitter again. The siren will chirp once indicating that active arming has been
programmed. Once the desired setting has been selected, release the Valet/Program switch.
You can advance from feature to feature by pressing and releasing the Valet/Program switch the number of times
necessary to advance from the feature you just programmed to the feature you wish to access. If you just pro-
grammed Feature 2 (Arm/Disarm Chirps) to off and you next want to program Feature 4 (Passive Locks), release
the Valet/Program switch, press and release it twice to advance from Feature 2 to Feature 4. Then press it once
more and hold it. The unit will chirp four times to confirm that you have accessed Feature 4.
To exit the learn routine, do one of the following:
1. Close the open door.
2. Turn the ignition on.
3. No activity for longer than 15 seconds.
4. Press the Valet ® /Program switch too many times.
The siren will emit a long chirp when the Learn Routine has been exited.

feature menu

Features in bold text have been programmed to the two chirp setting at the factory.
FEATURE NUMBER
1
2
3
4
5
6
7
8
9
10
11
© 2002 Directed Electronics, Inc. Vista, CA
ONE-CHIRP SETTING (DEFAULT)
Active arming
Arm/disarm chirps on
Ignition-controlled door locks
Active locking only
Panic with ignition on
0.8 second door lock pulses
Forced passive arming on
Automatic engine disable on
Double pulse unlock off
Code Hopping on
Siren
TWO-CHIRP SETTING
Passive arming
Arm/disarm chirps off
Standard door locks
Passive locking
No panic with ignition on
3.5 second door lock pulses
Forced passive arming off
Automatic engine disable off
Double pulse unlock on
Code Hopping off
Horn honk
29