Page 1: Table Of Contents
ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Contents Introduction ..............
Page 2 Enjoying 3D image viewing........70 Before using the 3D glasses ......... 70 Preparing for the 3D glasses ......... 71 Part names ............71 Using the 3D glasses ..........72 Before using the 3D glasses ......72 Attaching the Nose Pad ........72 Using the 3D glasses........
Page 3: Introduction
Introduction Precautions for daily use Observe the following items Maintenance of the cabinet • When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently. • Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack.
Page 4: Important Safety Precautions
Introduction Important Safety Precautions • When relocating the product • Water and moisture — Do not use placed on a cart, it must be moved the product near water, such as with utmost care. Sudden stops, bathtub, washbasin, kitchen sink, excessive force and uneven floor laundry tub, swimming pool and in a surface can cause the product to fall...
Page 5 AC outlet, or from the AC break when the product is struck INPUT terminal on the rear of the product. forcefully or with a sharp object. If the LCD panel is broken, be careful NOTE not to be injured by broken glass.
Page 6: Supplied Accessories
Page 9 Optional accessories The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.
Page 7: Preparation
Preparation Insert and tighten the M5 screws (length: 14 mm) Attaching the stand unit into the holes on the rear of the TV. • Before attaching (or detaching) the stand, unplug the AC cord. M5 screws • Before performing work, spread cushioning over the surface on which you will be laying the TV.
Page 8: Protection Against Overturning
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip- resistant measurement for your safety. Anchoring the TV to the wall or a pillar Affix the TV to the wall or a pillar using View from the top extra strong ties and cup hooks.
Page 9 Preparation Before turning on the power Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. Connecting the antenna cable.
Page 10: Using The Remote Control Unit
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover.
Page 11: Part Names And Functions
Part names and functions TV (front view) SD card slot (See page 61.) POWER button MENU button INPUT button Channel buttons (CHr/s) Volume buttons (VOLk/l) 3D infrared emitter* REC indicator OPC sensor* Remote control sensor TIMER indicator POWER indicator LED illumination This panel emits infrared signal towards the 3D glasses you wear when viewing 3D images.
Page 12 Part names and functions TV (rear view) — continued USB 1 terminal OUTPUT (Headphones/ AUDIO (R/L)) terminal* USB 2 terminal (WIRELESS LAN) DuoBass (Woofer) HDMI 1 (HDMI/ARC) terminal (INPUT 1) HDMI 2 (HDMI) terminal (INPUT 2) HDMI 3 (HDMI) terminal (INPUT 3) (DC 5V 900mA) HDMI 4 (HDMI/MHL) terminal (INPUT 4)*...
Page 13: Remote Control Unit
Part names and functions Remote control unit a/b/c/d (Cursor) Select a desired item on the setting screen. (ENTER) Execute a command. Turn off the On-Screen Display. e (Mute) Mute the sound. 10 Y + / – Set the volume. 11 EPG D-TV only: To display EPG (Electronic Programme Guide) screen.
Page 14: Quick Guide
To maximise the performance of YouTube content it is highly recommended that the user can access the content via the dedicated YouTube application on this TV. Sharp recommends that from time to time you update your TV’s software via the internet or by downloading updates onto a USB. Go to www.sharp.com.hk.
Page 15 Quick guide Using software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Clear Cancel Delete Cursor Left Caps Char.Set Cursor Right Char. Set Input cursor 10 Clear Press c/d to move the cursor when Changes character set into the Erases the character string.
Page 16: Initial Auto Installation
Quick guide Initial auto installation Checking signal strength and channel strength (D-TV only) When the TV powers on for the first time after purchase, the initial auto installation wizard appears. Follow the If you install a D-TV antenna for the first time or relocate menus and make the necessary settings one after it, you should adjust the alignment of the antenna to another.
Page 17: Watching Tv
Watching TV Daily operation Turning on/off the power – using the control panel of the TV Turning on/off the power Turn on the power. Press < on the TV (after a few seconds, an image appears with sound). • Wait more than five seconds until you press < on the TV after inserting the power plug.
Page 18 Watching TV A-TV (Analogue TV)/D-TV (Digital TV) buttons Use the following buttons on the remote control to When you watch the TV for the first time operate the menu. When the TV powers on for the first time after purchase, perform the auto installation.
Page 19: Ch List
Watching TV CH list Programme information (D-TV only) You can check the CH list and view detailed information. Option HOME HOME MENU MENU Programme info. While watching D-TV you can check the extended programme information on the screen using INFO on the remote control.
Page 20: Switching The Digital Audio Format (D-Tv Only)
Watching TV When receiving a bilingual signal Switching the digital audio format Each time you press MPX, the mode switches among (D-TV only) NICAM CH A, NICAM CH B, NICAM CH AB and MONO. Bilingual mode If multi sound modes are received, each time you press MPX the mode switches as follows.
Page 21: Favourite Channel Information
Watching TV Selecting channels from “My favourite” list Favourite channel information How to move between “My favourite” list and “CH list”. Before installation 1 Press This function allows you to group your favourite channels when you watching D-TV to ENTER in a separate list.
Page 22: Epg (D-Tv Only)
Watching TV EPG display settings EPG (D-TV only) EPG is a programme list that is displayed on the screen. Option With the EPG, you can check the schedule of D-TV, view detailed information about them, tune to a programme Display range setup currently on-air.
Page 23: Selecting A Programme Using Epg (D-Tv Only)
Watching TV Selecting a programme using EPG (D-TV only) Basic operation Display the EPG screen EPG [DTV-TV] Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8 [Fri] 1/4 20:00 Press EPG. SD Moving 20:00 - 21:00 SD Moving SD Moving SD Moving HD ColorBar HD ColorBar HD ColorBar...
Page 24 Watching TV 4 Search a programme in a category Press G. Press a/b to select the desired genre, and then press ENTER. Press a/b to select a programme you want to watch, and then press ENTER. EPG [DTV-TV] Today [Sat]2 [Sun]3 [Mon]4 [Tue]5...
Page 25: Timer Setup Using Epg
Watching TV Timer setup using EPG The TV can be switched to a programme or start recording for USB recording at the set time. Press EPG. Press a/b/c/d to select the programme you want to set, and then press ENTER. Press c/d to select “Watch”...
Page 26: Connecting External Devices
Connecting external devices Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audio visual quality to maximise the potential of the TV and the connected device.
Page 27: Video Connections
Connecting external devices DVI/HDMI conversion Video connections Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI HDMI connection connection. The sound must be fed in additionally. • When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly.
Page 28: Component Connection
Connecting external devices Component connection Example of connectable devices DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the INPUT 5 terminal when connecting a DVD player/recorder or other device. AUDIO-R (Red) AUDIO-L (White) INPUT 5 Y (Green) (Red) P (Blue)
Page 29: Audio Connections
Connecting external devices NOTE Audio connections • If the image is not in sync with the audio, check the settings of the connected surround system. Speaker/amplifier connection After connecting Connect an amplifier with external speakers as shown Digital audio output setting below.
Page 30: Aquos Link
AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
Page 31: Aquos Link Connection
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player that supports the HDMI CEC protocol. NOTE • Refer to the operation manual of the device to be connected for further details. • After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power have been turned on.
Page 32: Operating An Aquos Link Device
AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected Use the following procedure to start recording. device with a single remote control unit. Check the following items before recording. • Make sure the antenna cable is connected properly. •...
Page 33: Using A Smartphone With The Tv
AQUOS LINK AQUOS LINK control Set to “On” to enable HDMI CEC functions. If this is activated, the one touch play function is enabled. • The factory default for this item is “Off”. Auto power on While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.
Page 34 AQUOS LINK Auto power on When an MHL-compatible device is connected to the TV, the TV turns on automatically. • This function operates when “AQUOS LINK control” is set to “On”. (See page 33.) Auto input selection When an MHL-compatible device is connected while the TV is on, the input mode is selected automatically.
Page 35: Basic Adjustment
Basic adjustment NOTE Picture settings “PC” is available only when selecting “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4” or “PC” from the “INPUT” menu. • You can select a different “AV mode” item for each input Go to “HOME” > “TV Menu” > “Setup” > “Picture”. mode (for example, select “STANDARD”...
Page 36 Basic adjustment Colour temp. Picture Picture adjustments Adjusts the colour temperature to give the best white image. Adjusts the picture to your preference with the following Item Description picture settings. High White with bluish tone. Adjustment items Intermediate tone between “High” and Mid-High “Middle”.
Page 37: Audio Settings
Basic adjustment Audio settings Gamma adjustment Selects the tone difference of the brightness and Go to “HOME” > “TV Menu” > “Setup” > “Audio”. darkness of the image according to the type of programme watched from a maximum of e3 to a Menu minimum of f3.
Page 38: Clear Voice
Basic adjustment Audio Surround This function produces a surround effect from the speakers. Item Description Reproducing lifelike experience of excitements such that live sports or 3D Stadium concert performances in a stadium create. Reproduces a concert hall experience with realistic live surround sound based 3D Hall on reverberant sounds measured in a concert hall.
Page 39: Power Save Settings
Basic adjustment Power save settings No signal off Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Menu When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes. CH list Setup NOTE : Select...
Page 40: Channel Settings
Basic adjustment View setting Channel settings Programme setup Go to “HOME” > “TV Menu” > “Setup” > “View setting”. You can run the auto search procedure again at any time by accessing the “Setup” menu and “Programme setup”. Menu Channels can be tuned automatically or manually. CH list Setup Digital setting (D-TV only)
Page 41: Analogue Setting
Basic adjustment Buttons for “Manual adjust” operation Manual adjust Lock Press R button. You can reconfigure the analogue TV channels settings When the service is locked, you must enter your password automatically or manually. whenever you tune to the service. After selecting “Yes”...
Page 42: Sort
Useful viewing functions Basic adjustment Label TV Start-up time setting When a TV channel sends its network name, the “Auto installation” detects the information and assigns a Option name to it. However, you can change channel names Standby mode individually. Select each character of the new name for the channel with using the software keyboard (see You can reduce the TV’s start-up time after turning on...
Page 43: Individual Setting - Password
Useful viewing functions Deleting the password Individual setting – Password Allows you to reset your password. Enter the password. View setting Press c/d to select “No”, and then press ENTER. Password Press c/d to select “Yes”, and then press ENTER. Allows you to use a password to protect certain settings from being accidentally changed.
Page 44: Individual Setting - Time
Useful viewing functions Individual setting – Time Individual setting – Language View setting View setting Clock setup Digital audio language (D-TV only) Set up to three preferred multi audio languages to Go to “HOME” > “TV Menu” > “Setup” > “View display if the audio languages are available.
Page 45: Optional Features Settings
Useful viewing functions Item for SD (Standard-Definition) signals Optional features settings Keeps the original aspect ratio in a full Normal screen display. Go to “HOME” > “TV Menu” > “Setup” > “Option”. For 14:9 letterbox pictures. A thin side Menu bar appears on each side, and you may Zoom 14:9 also see bars on the top and bottom...
Page 46: Audio Select
Useful viewing functions Option Option 4:3 mode (D-TV only) Audio select The 4:3 mode allows you to select between “Full” and When using the PC terminal or HDMI2 terminal, you “Normal”. must select which terminal uses the AUDIO IN jack for analogue audio input.
Page 47: Input Label
Useful viewing functions Option Option Input label Headphone/Audio out select You can label each input source with a custom You can select which device is used for outputting audio. description. Go to “HOME” > “TV Menu” > “Setup” > “Option” Press TV/VIDEO on the remote control or INPUT >...
Page 48: Colour System
Useful viewing functions Option Option Colour system Programme title display (D-TV only) You can change the colour system to one that is This function allows you to display programme compatible with the image on the screen. information such as the title and airtime by tuning a channel.
Page 49: Additional Features
Boot picture in the USB device or SD/SDHC memory card. Item Description With this function activated, the SHARP logo will be The images pre-installed in the TV will be displayed when you turn on the TV. Pre-installed displayed in a slideshow.
Page 50: Network Function
Network function Useful viewing functions Playing back files from a portable Option device or PC Key lock With the remote playback function, you can use your This function allows you to lock the buttons on the TV portable device to playback pictures, video and music on or remote control unit in order to prohibit children from the home network server.
Page 51: Connecting To The Network
Network function Connecting to the network When using Easy setup function To enjoy internet services, you need to connect the Refer to “How to connect”. TV to a router with a high speed connection to the Go to “HOME” > “TV Menu” > “Setup” > internet.
Page 52 Network function NOTE When using Manual setup function • When using the SHARP wireless LAN USB adapter (supplied accessory), try to provide as much free space around the device for best performance. Refer to “How to connect”. • A wireless LAN connection and performance cannot be Go to “HOME”...
Page 53: Specifications (Wireless Lan Usb Adapter)
Network function Specifications (Wireless LAN USB adapter) Product name 802.11n Dual Band WLAN adapter Standard IEEE 802.11a/b/g/n Host interface Frequency band 2412f2484 MHz 5150f5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps...
Page 54: Using Aquos.net
Network function Press a/b/c/d to select a function, and then Using AQUOS.NET press ENTER. By connecting the TV to the Internet, you can enjoy a Selected item Description variety of broadband content. Go back to the previous page. Press HOME to display the “HOME” screen. a/b/c/d Press to select “AQUOS.NET”...
Page 55: Clear Browser Setting
Network function Clear browser setting You can clear browser setting, which includes cookies, bookmarks and caches. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Clear browser setting”. NOTE • Password input is required when executing “Clear browser setting”...
Page 56 Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Page 57: Other Useful Features
Other useful features Disconnecting the USB HDD USB recording When you disconnect the USB HDD, be sure to the You can enjoy D-TV recording or playback by connecting following steps. a commercially available USB HDD to the TV. Go to “HOME” > “TV Menu” > “Setup” > “View •...
Page 58: How To Operate Usb Recording
Stop the programme in playback and go playback on other TV or PC. back to the real time broadcast (live). SHARP Corporation bears no responsibility regarding Pause the programme in playback (USB compensation for content when recording does not recording continues).
Page 59: Usb Recording
Other useful features USB recording Manual timer setting “Manual timer setting” enables you to set date, recording You can record the programme you are watching to the start/stop time and channel. registered USB HDD. Press EPG. Starting USB recording Press B to display the timer list. Press B again to display the “Manual timer Press REC E.
Page 60: Time Shift Playback
Other useful features Time shift playback View setting Auto input selection Playback recorded scenes of the programme being recorded. Press d during recording. • Press H to return the scene that is broadcasting. You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK NOTE compatible signal on the TV during USB recording...
Page 61: Multimedia/Home Network
Other useful features Selecting modes and drives/servers View setting Device format Press B. Multimedia mode (Example) You can format all data on the USB HDD. Multimedia menu Go to “HOME” > “TV Menu” > “Setup” > “View Media selection [Flash Disk setting”...
Page 62: Photo Mode
Other useful features Photo mode Viewing enlarged photos Buttons for enlarged photo display operation Viewing thumbnails (When using Multimedia mode) Select photo Multimedia Buttons Description [File name order] Flash Disk > Demo Go to the previous/next photo in the Demo c/d (Cursor) same directory.
Page 63: Music Mode
Other useful features Slide show Slide show Buttons for slide show operation (When using Multimedia mode) Selecting the Background music (BGM) Setup the slide show Background music (BGM) from Buttons Description “Select slide show BGM” by pressing B when selecting Return to the previous operation.
Page 64: Video Mode
Other useful features Video mode Buttons Description b (Cursor) Go to the next file. c/d (Cursor) Reverse/fast forward a video. 16 Files 8 Files 15 Files 15 Files 10 Files Go back to the file selection screen. Switch between 2D and 3D modes. Start playback from the previously R button stopped scene.*...
Page 65: Home Network Server Compatibility
Other useful features EXAMPLE Video file format frame File Supported Audio bit rate Container Video decoder rate extension resolutions decoder (Mbps) (fps) DivX 1920×1080 3.11/4.x/5.1/6.0 Dolby XviD 1920×1080 Digital *.avi H.264 1920×1080 LPCM Item Description ADPCM MPEG4 1920×1080 Keeps the original aspect ratio in an enlarged Auto screen display.
Page 66: Connecting A Pc
Connecting a PC Connecting a PC Displaying a PC image on the screen HDMI connection Selecting the picture size HDMI 1, 2, 3 or 4 terminals You can select the picture size. Press WIDE. • The “Wide mode” menu displays. Press WIDE or a/b to select the desired item.
Page 67: Adjusting The Pc Image Automatically
Connecting a PC Adjusting the PC image Adjusting the PC image manually automatically Option Option Fine sync. Auto sync. Ordinarily you can easily adjust the picture as necessary to change image position using “Auto sync.”. In some This function enables the screen to be automatically cases, however, manual adjustment is needed to adjusted to its best possible condition when the optimise the image.
Page 68: Pc Control Of The Tv
Connecting a PC Set the RS-232C communications settings on the PC PC control of the TV to match the TV’s communications conditions. The TV’s communications settings are as follows: • When a programme is set, the TV can be controlled Baud rate 9,600 bps from the PC using the RS-232C or IP.
Page 69: Command List
Connecting a PC Command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER TOGGLE POWER OFF (STANDBY) SETTING MUTE MUTE INPUT SWITCHING MUTE OFF (TOGGLE) SURROUND TOGGLE TV (CHANNEL FIXED) INPUT SURROUND NORMAL D-TV (CHANNEL FIXED) SELECTION SURROUND OFF HDMI 1f4 (1f4),...
Page 70: Enjoying 3D Image Viewing
Enjoying 3D image viewing You can enjoy 3D-supported images on this TV when you wear 3D glasses. To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. NOTE •...
Page 71: Preparing For The 3D Glasses
Enjoying 3D image viewing NOTE Preparing for the 3D glasses • The power turns off automatically when the 3D glasses are not operated in standby for approximately 15 seconds. Power button Part names • When the power button is pressed for 2 or more seconds with the power off, pairing with the TV starts.
Page 72: Using The 3D Glasses
Enjoying 3D image viewing Using the 3D glasses Pairing the 3D glasses To view 3D images, it is necessary to pair the 3D glasses Before using the 3D glasses and TV. • To confirm pairing of the 3D glasses and TV, make sure that 3D images are displayed on the TV screen.
Page 73: Replacing The Battery
Enjoying 3D image viewing Align the battery holder with the battery slot on the Replacing the battery 3D glasses and slide it back into place. • Press it in until it locks. The battery has an expected service life of approximately 100 hours.
Page 74: Cautions For 3D Image Viewing
• You may not be able to use several menu items while you are watching the TV in 3D mode. • You cannot use the 3D function in radio or data mode. NOTE • These 3D glasses are only for use with SHARP LCD TVs supporting 3D. Display format for 3D and 2D images Image for input signals...
Page 75: Viewing 3D Images
Enjoying 3D image viewing Take off the 3D glasses and turn off the power of Viewing 3D images the 3D glasses. • Press the power button for at least two seconds. • The LED light lights for two seconds. HOME HOME MENU MENU...
Page 76: Watching 2D Images In 3D
Enjoying 3D image viewing Watching 2D images in 3D Configuring the TV settings to enhance 3D image viewing You can convert normal 2D images into 3D images. You can make various settings to enhance 3D image Press 3D. viewing. Press c/d to select “2D s 3D”, and then press ENTER.
Page 77: 3D Setup
Enjoying 3D image viewing 3D setup Viewing time info This function allows you to display the elapsed time of Basic operation 3D image viewing on the screen. Go to “HOME” > “TV Menu” > “Setup” > “Option” Item Description > “3D setup” > select the menu you want to set. The elapsed time is displayed in one- 3D auto change hour increments after you start watching...
Page 78: Specifications - 3D Glasses
Enjoying 3D image viewing Specifications — 3D glasses Product 3D Glasses Lens type Liquid crystal active shutter Power supply DC3V Battery Lithium button battery (CR2025 x 1) Battery life Approx. 100 hours of continuous use Dimension (W x H x D) 171 ×...
Page 79: Troubleshooting - 3D Images
Enjoying 3D image viewing Troubleshooting — 3D images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “Off”? Press 3D to switch to 3D mode (Page 77). • If “3D auto change” is set to “Mode1” or “Mode2” but no 3D images are displayed, check the display format of the content being viewed.
Page 80: Appendix
Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed < on the TV. • When the power switch does not work, remove the power plug and insert it again, and press <...
Page 81: Reset
Ensure that your TV software version is always up to to the factory preset values. date. From time to time SHARP will make updated TV Go to “HOME” > “TV Menu” > “Setup” > “View base software and D-TV software available.
Page 82: Getting Information
Appendix Getting information Updating your TV via USB/Network Information Information Picture / Audio test Software update When external equipment is connected with the TV This function allows you to update to the latest software powered on and there is no audio/video output, the TV using a USB device or Network.
Page 83: Information On The Software Licence For This Product
Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Warning regarding basic use Cautions regarding use in high and low temperature environments •...
Page 84: Trademarks
LC _ LCFONT+ and LC logo mark are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on an LCD screen. However, other non-LCD fonts are used for displaying some screen pages.
Page 85: Specifications
If you insert any card other than the SD/SDHC (class 6 or higher), it will not work. • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Page 86: Removing The Stand
Appendix Removing the stand For wall mounting with the bracket remove the stand. Before setting TV on the wall • Remove the connected cables (DVD, VCR, etc.) from the terminals. • Before performing work, make sure to turn off the TV. •...
Page 87: Mounting The Tv On A Wall
TV. • Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Page 88: Dimensional Drawings
Appendix Dimensional drawings Unit : mm LC-70UD1H 1578 114* 1539* LC-6070UD1H_EN_book.indb 88 LC-6070UD1H_EN_book.indb 88 1/2/2014 8:57:39 AM 1/2/2014 8:57:39 AM...
Page 89 Unit : mm LC-60UD1H 1378 1331 Active area Thinnest part Including projecting parts NOTE • Dimensions do not include protrusions such as screws and some parts. LC-6070UD1H_EN_book.indb 89 LC-6070UD1H_EN_book.indb 89 1/2/2014 8:57:39 AM 1/2/2014 8:57:39 AM...
Page 90: Clearing The Password
Appendix CLEARING THE PASSWORD Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Password”. The password input screen displays. Press and hold both CHr and Y+ on the TV simultaneously until the message appears on the screen. NOTE •...

This manual is also suitable for:

Aquos lc-60ud1h Aquos lc-70ud1h

Sharp LCD colour TV Operation Manual

Introduction

Preparation

Part Names and Functions

Quick Guide

Watching TV

Connecting External Devices

Aquos Link

Basic Adjustment

Useful Viewing Functions

Network Function

Other Useful Features

Connecting a PC

Enjoying 3D Image Viewing

Appendix

Quick Links

Troubleshooting

Related Manuals for Sharp LCD colour TV

Summary of Contents for Sharp LCD colour TV

This manual is also suitable for:

Table of Contents