Sharp LC-R60HDU Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. LC-R60HDU
  6. Service manual
Sharp LC-R60HDU Service Manual

Sharp LC-R60HDU Service Manual

Lcd high-definition rear projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
• SPECIFICATIONS ............................................. 2
• NOTE TO SERVICE PERSONNEL ................... 4
• OPERATION MANUAL ...................................... 7
• REMOVING OF MAJOR PARTS ...................... 11
• REPLACING THE LAMPS ............................... 13
AFTER LAMP REPLACEMENT ...................... 14
• THE OPTICAL UNIT OUTLINE ........................ 16
• ADJUSTING THE FOCUS ............................... 19
• ELECTRICAL ADJUSTMENT .......................... 30
• TROUBLE SHOOTING TABLE ........................ 37
SHARP CORPORATION
SERVICE MANUAL
LCD High-Definition
REAR PROJECTOR
LC-R60HDU
MODEL
CONTENTS
Page
• CHASSIS LAYOUT .......................................... 46
• BLOCK DIAGRAM ........................................... 48
• OVERALL WIRING DIAGRAM ........................ 50
• WAVEFORMS .................................................. 53
• SCHEMATIC DIAGRAM .................................. 54
Ë ELECTRICAL PARTS ................................. 98
Ë ACCESSORIES PARTS ........................... 126
Ë PACKING PARTS ..................................... 126
• PACKING OF THE SET ................................. 127
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
1
LC-R60HDU
S50Z9LCR60HDU
Page

Advertisement

Table of Contents
loading

Related Manuals for Sharp LC-R60HDU

Summary of Contents for Sharp LC-R60HDU

  • Page 1: Table Of Contents

    LC-R60HDU SERVICE MANUAL S50Z9LCR60HDU LCD High-Definition REAR PROJECTOR LC-R60HDU MODEL In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.

  • Page 2: Specifications

    LC-R60HDU Specifications Model: LC-R60HDU Product Name: LCD High-Definition Rear Projector Model Name: LC-R60HDU Display: 3 liquid crystal panels, 3-primary color light shutter Liquid Crystal Panel : 2.6" (32.77(H) × 57.6(W) mm) Panel Size Type : Transmissive type TN liquid crystal panel...

  • Page 3: Important Service Safety Notes

    LC-R60HDU IMPORTANT SERVICE SAFETY NOTES Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: » Use an AC voltmeter with sensitivity of 5000 ohm per WARNING volt., or higher, sensitivity to measure the AC voltage...

  • Page 4: Note To Service Personnel

    LC-R60HDU NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5...
  • Page 5 LC-R60HDU 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5...
  • Page 6 LC-R60HDU WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO WET LOCATIONS. See rear of actual set. The lightning flash with arrowhead within a CAUTION triangle is intended to tell the user that parts inside the product are risk of electric shock RISK OF ELECTRIC SHOCK.
  • Page 7 LC-R60HDU Location of Controls Rear projector Front and Rear View CONTROL PANEL LAMP indicator POWER indicator FUNCTION LOCK indicator Screen LAMP POWER FUNCTION LOCK Remote control signal receiver INPUT SELECT VOLUME VOLUME buttons INPUT SELECT button POWER button POWER Speakers...
  • Page 8 LC-R60HDU Operating the Remote Control Remote Control Unit Front View Side View Remote control signal R/C ON OFF switch MUTE button POWER button BACK button VOLUME buttons INPUT button ON SCREEN button MENU button ADJUSTMENT buttons ENTER button VIEW MODE button...
  • Page 9 LC-R60HDU Loading Batteries into the Remote Control Unit You must load batteries into the remote control unit before you can use it to control the Projector. To load batteries into the remote control unit Pressing the center of the battery compartment cover, slide it in the direction indicated by the arrow to remove it.
  • Page 10 LC-R60HDU Dimensions Top View Left View Right View Front View Under View (Units: mm)

  • Page 11: Removing Of Major Parts

    LC-R60HDU REMOVING OF MAJOR PARTS 1. Removing the cabinet B. 1-1. Remove the 20 cabinet B lock screws and the 4 anti-fall holder screws. Detach the cabinet B. Cabinet B 2. Removing the front ballast unit. 2-1. Remove the left speaker grille.
  • Page 12 LC-R60HDU 3. Removing the rear ballast unit. 3-1. Remove the 12 rear cover lock screws, 8 terminal panel lock screws and 3 power PWB unit lock screws. Detach the rear cover. 3-2. Remove the 2 screws off the vent fan assembly and detach the vent fan assembly.

  • Page 13: Replacing The Lamps

    LC-R60HDU REPLACING THE LAMPS 1. Temperature monitor and light source indicator lamps on the front panel Indicator lamps (on front panel) Lamp Power Condition ON in green ON in green Both lamps functioning. ON in red ON in red No.1 lamp failure, to be replaced.

  • Page 14: Resetting The Lamp Timer After Lamp Replacement

    LC-R60HDU RESETTING THE LAMP TIMER AFTER LAMP REPLACEMENT When the lamp has been replaced, reset the lamp timer in the procedure below to have the lamp-on hours displayed correctly. This model has two lamps in it. Reset the timer of the lamp that has been replaced.
  • Page 15 LC-R60HDU [Using the buttons on the remote controller] (1) On the test mode screen, move the cursor (yellow), using the ("',"") buttons, to select the number of the replaced lamp (LAMP No.1 or No.2). (2) Press the "ENTER" button twice.

  • Page 16: The Optical Unit Outline

    LC-R60HDU THE OPTICAL UNIT OUTLINE Layout for optical unit parts (top view) Projection lens Incident polarizing plate B Incident polarizing plate R Dichroic coating (B transmitted) Dichroic coating (R transmitted) UV Filter LCD(B) LCD(R) Cross-dichroic prism B light source Condenser lens R...

  • Page 17: Replacing The Optical Mechanism Unit

    LC-R60HDU REPLACING THE OPTICAL MECHANISM UNIT 1. Removing the optical mechanism unit 1-1. Remove the 12 rear cover lock screws, 8 terminal panel lock screws and 3 power PWB unit lock screws. Detach the rear cover. 1-2. Remove the 2 vent fan assembly lock screws and detach the vent fan assembly.
  • Page 18 LC-R60HDU 2. Installing a replacement optical mechanism unit 2-1. Replace the γ data flash memory (IC1018) - on the output PWB that has been taken out in "1. Removing the optical mechanism unit" - with the γ data flash memory (IC1018) of a replacement optical mechanism unit. Be careful not to confuse the IC’s orientation.

  • Page 19: Adjusting The Focus

    LC-R60HDU ADJUSTING THE FOCUS » Choose a dust-free workshop to adjust the focus. » Disconnect the LCD panel output lead from the connector. With the output PWB and the radiation fins detached (but keep the output PWB and other connectors connected), turn on the power.

  • Page 20: Readjusting The Convergence

    LC-R60HDU READJUSTING THE CONVERGENCE » Choose a dust-free workshop to readjust the convergence. » Turn on the power with the LCD rubber bushing off. Keep the projection lens focus intact in its initial condition. » Feed the crosshatch pattern signal and get the green and other to-be-adjusted color only displayed.
  • Page 21 LC-R60HDU Convergence and focus adjustments at a glance Definitions of adjusting directions Item Direction Definition LCD orientation X direction Right and left Convergence Y direction Up and down adjustment θZ direction Z-axis rotation Turning Z direction Optical axis Focus θX direction X-axis rotation...
  • Page 22 LC-R60HDU Replacing the LCD » Choose a dust-free workshop to replace the LCD. (1) Disconnect the LCD flat cable from the output PWB connector. (2) Take out the output PWB and the top shield. (3) Loosen the lock screws "d" and detach the lock plate.
  • Page 23 LC-R60HDU Adjusting the mirror optical axis This adjustment is intended to correct possible shading in the R, G or B color. It is necessary to readjust the optical axis when any optical part in the mechanism has been replaced. Procedure 1.
  • Page 24 LC-R60HDU Adjusting the counter voltage and chromaticity, and creating the γ data Take the following procedures after the LCD panel has been replaced and the convergence readjusted. Chromaticity adjustment and γ data program diagram Universal Programmer LCR60HDU CL100 MODEL 1881...
  • Page 25 LC-R60HDU 1. Preparations (equipment connections and standard adjustment) (1) Connect the specific cable between the personal computer’s RGB output terminal and the LA connector on the output PWB. (2) Have the property dialog box on the computer screen. Call the VGA mode (640 x 480), True Color mode (24 bits) and LCD+CRT mode (simultaneous display) and get the adjustment program (60HD_RS.exe) started.
  • Page 26 LC-R60HDU (4) Turn on the projector power and make sure that the image on the computer screen shows up on the projector screen. There is no problem if the image is not clear. (5) Select RESET in the picture status.
  • Page 27 LC-R60HDU 3. Adjusting the chromaticity (white-to-white voltage) (1) Attach the CL100 measuring probe at the center of the screen (using mild-adhesive tape or the like). (2) Get the adjustment program started. Select [Measure (M)] first and then White Balance (W) (on Screen 1).
  • Page 28 LC-R60HDU (29) Measure the illuminance at the target chromaticity. Enter the measurement in the box. (30) The ratio of this measurement to the 93% white-adjusted illuminance will be automatically calculated. (31) If the illuminance ratio is way out of spec (below 70%), readjust the chromaticity as in Step 26 again.
  • Page 29 LC-R60HDU 4. Creating the γ data Create the γ data after adjusting the chromaticity. Select RESET in the picture status. (1) Get the adjustment program started. (2) Feed the 100% level signal. (3) Select [Measure (M)] first and then Adjust (A). Adjust the voltage to 0.7 Vp-p for each color.

  • Page 30: Electrical Adjustment

    LC-R60HDU ELECTRICAL ADJUSTMENT » All the settings have been factory-adjusted to their best points. If by any chance out of spec or after replacement of relevant parts, take the following adjustment procedures. » The HD signal is of 1035I for the Japanese market.
  • Page 31 LC-R60HDU Adjusting point Adjusting conditions Adjusting procedure » Connect the oscilloscope to TP4029 (R signal). Sub-tint 1. Input signal:Color bar HD Using the [\ |] buttons on the remote controller, Adjustment on signal CXA2101 main adjust the setting so that the yellow and magenta...
  • Page 32 LC-R60HDU Adjusting point Adjusting conditions Adjusting procedure » Get the waveforms at TP1439 and TP1441 over- AD input 1. Input signal: 10-step lumi- Reference lapped on the oscilloscope screen. Adjust the nance HD signal Red/white level voltage at TP1441 to the video signal peak.
  • Page 33 LC-R60HDU Adjusting point Adjusting conditions Adjusting procedure » Get the waveforms at TP1443 and TP1442 over- AD input 1. Input signal: 10-step lumi- Reference lapped on the oscilloscope screen. Adjust the nance HD signal Green/black voltage at TP1442 to the video signal peak.
  • Page 34 LC-R60HDU Adjusting point Adjusting conditions Adjusting procedure » Select L1 in the process mode. Check the color Color-related 1. Receive the HD color bar performance and tint settings. signal. checking » Select L2 in the process mode. Check the picture, Video-related 1.
  • Page 35 LC-R60HDU Process Mode Menu Display (1) MAIN menu (2) VIDEO-1 menu ADJIN VIDEO-1 ADJ Ver 1.00 VIDEO 1 SOUND 1 BRIGHT 23 9 R-DRV VIDEO 2 2 CONT 10 G-DRV VIDEO 3 LINE 3 TINT 11 B-DRV VIDEO 4 TEST...
  • Page 36 LC-R60HDU (7) UP-CON menu (8) SOUND menu UP-CON ADJ SOUND ADJ 1 V ENH 10 OUTPUT 1 VOLUME 2 H ENH 11 P-MODE 2 AGC 3 V POS 12 C-SYSTE [N3] 3 MODE 4 H POS 4 BALANCE 10 5 V SIZE...

  • Page 37: Trouble Shooting Table

    LC-R60HDU TROUBLE SHOOTING TABLE START Are AC cord and signal cables correctly connected? Check connections. Turn on power. Reconnect as required. Does power LED light up properly? Go to "Checking power supply". Does the lamp stay on? Go to "Checking lamp compartment".
  • Page 38 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) Checking main signal input circuit Component signal input Video / S signal input being being received received Are there input signals to Are there input signals to IC4001 at the following pins: IC4002 at the following pins:...
  • Page 39 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) Checking LCD drive PWB Are there output signals at Checking PLL and clock pins (1), (3), (5), (7) and (9) circuits. of LA: TP1448 [G], TP1449 [B], TP1450 [R], TP1451 [H] and TP1452 [V]? Check LA connection cable.
  • Page 40 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) Checking LCD timing pulse Are outputs (source driver clock) at IC6001, IC6003, IC6005, IC6007, IC6009, IC6011, IC6013, IC6015, IC6017, IC6019, IC6021 Check IC6001, IC6003, and IC6023 as specified? IC6005, IC6007, IC6009, IC6011, IC6013, IC6015, IC6017, IC6019, IC6021, IC6023 and their peripheral circuits.
  • Page 41 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) Checking audio circuit Component signal input Video / S signal input being being received received Are there input signals to Are there input signals to IC3004 at the following pins: IC4022 at the following pins:...
  • Page 42 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) * After checking the lamp compartment, select the lamp marked with NG Checking lamp compartment on the test mode screen of the process menu. Press the ENTER button on the remote controller twice. If NG is still there, go to the next troubleshooting item.
  • Page 43 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) Checking OSD Are there input signals at pins (2) Are there output signals at pins (24), thru (5) of MB on main PWB? (32), (33) and (34) of IC2003? Check IC2003 and its peripheral circuits.
  • Page 44 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) Checking remote controller Replace remote controller. Is there output at pin (9) of Does new remote controller LE using remote controller? function? Operation PWB defective. Remote controller defective. Is there output signal at pin LE cable defective.
  • Page 45 LC-R60HDU TROUBLE SHOOTING TABLE (Continued) Checking power supply Is there 7V output signal at Is power LED (red) on? pin (1) of ED? Check IC7101, F7001, F7003 and their peripheral circuits. Check IC2003, Q2001 and Is there 5V(TPOW) output their peripheral circuits.

  • Page 46: Chassis Layout

    LC-R60HDU CHASSIS LAYOUT...

  • Page 47: Block Diagram

    LC-R60HDU BLOCK DIAGRAM...

  • Page 48: Overall Wiring Diagram

    LC-R60HDU OVERALL WIRING DIARGAM...

  • Page 49: Description Of Schematic Diagram

    LC-R60HDU DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 120V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
  • Page 50 LC-R60HDU WAVEFORMS 1 TP4027 2 TP4028 3 TP4029 4 TP4033 H:10 µsec/div H:10 µsec/div H:10 µsec/div H:10 µsec/div V:500mV/div V:500mV/div V:500mV/div V:1V/div 5 TP4034 6 TP3010 7 TP3011 8 TP3012 H:10 µsec/div H:10 µsec/div H:10 µsec/div H:10 msec/div V:1V/div V:200mV/div...
  • Page 51 LC-R60HDU Ë OUTPUT UNIT-1/7...
  • Page 52 LC-R60HDU Ë OUTPUT UNIT-2/7...
  • Page 53 LC-R60HDU Ë OUTPUT UNIT-3/7...
  • Page 54 LC-R60HDU Ë OUTPUT UNIT-4/7...
  • Page 55 LC-R60HDU Ë OUTPUT UNIT-5/7...
  • Page 56 LC-R60HDU Ë OUTPUT UNIT-6/7...
  • Page 57 LC-R60HDU Ë OUTPUT UNIT-7/7...
  • Page 58 LC-R60HDU Ë MAIN UNIT-1/5...
  • Page 59 LC-R60HDU Ë MAIN UNIT-2/5...
  • Page 60 LC-R60HDU Ë MAIN UNIT-3/5...
  • Page 61 LC-R60HDU Ë MAIN UNIT-4/5...
  • Page 62 LC-R60HDU Ë MAIN UNIT-5/5...
  • Page 63 LC-R60HDU Ë TERMINAL UNIT...
  • Page 64 LC-R60HDU Ë SOUND OUT UNIT...
  • Page 65 LC-R60HDU Ë CONTROL UNIT...
  • Page 66 LC-R60HDU Ë NETWORK-L UNIT...
  • Page 67 LC-R60HDU Ë NETWORK-R UNIT...
  • Page 68 LC-R60HDU Ë POWER UNIT-1/2...
  • Page 69 LC-R60HDU Ë POWER UNIT-2/2...
  • Page 70 LC-R60HDU Ë FAN CONTROL UNIT B-LCD R-LCD, G-LCD RADIATOR LAMP EXHAUST...

  • Page 71: Printed Wiring Board Assemblies

    LC-R60HDU PRINTED WIRING BOARD ASSEMBLIES Output Unit (Wiring Side)
  • Page 72 LC-R60HDU Output Unit (Component Side)
  • Page 73 LC-R60HDU Main Unit (Wiring Side)
  • Page 74 LC-R60HDU Main Unit (Component Side)
  • Page 75 LC-R60HDU Terminal Unit (Wiring Side)
  • Page 76 LC-R60HDU Terminal Unit (Component Side)
  • Page 77 LC-R60HDU Sound Out Unit (Wiring Side) Sound Out Unit (Component Side)
  • Page 78 LC-R60HDU Network-L Unit (Component Side) Network-R Unit (Component Side)
  • Page 79 LC-R60HDU Control Unit (Wiring Side) Control Unit (Component Side) Fan Control Unit (Component Side)
  • Page 80 LC-R60HDU Power Unit (Component Side)

  • Page 81: Parts List

    For location of SHARP Parts Distributor, IC1022 VHiHCT541AF-1 J TC74HCT541AF Please call Toll-Free; 1-800-BE-SHARP IC1401 VHiCXA2101Q-1 J CXA2101AQ-Tl IC1402 VHiCXA3026Q-1 J CXA3026Q-T6 in CANADA: Contact SHARP Electronics of Canada Limited IC1403 VHiCXA3026Q-1 J CXA3026Q-T6 Phone (416) 890-2100. IC1404 VHiCXA3026Q-1 J CXA3026Q-T6 IC1405 VHiM62392FP-1 J M62392FP...
  • Page 82 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 Q1831 VS2SA1724//-1 J 2SA1724 Q1832 VS2SC4504//-1 J 2SC4504 OUTPUT UNIT (Continued) Q1833 VS2SA1724//-1 J 2SA1724 Q1834 VS2SC4504//-1 J 2SC4504 IC1816 VHiNJU4052V-1 J NJU4052BV Q1835 VS2SA1724//-1 J 2SA1724...
  • Page 83 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 C1076 VCEAPF1HN105M J 1.0 Electrolytic C1077 VCKYCY1EF104Z J 0.1 Ceramic OUTPUT UNIT (Continued) C1078 VCCCCY1HH220J J 22p Ceramic C1401 VCKYTV1CF105Z J 1.0 Ceramic C1004 VCKYCY1EF104Z J 0.1...
  • Page 84 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 C1829 VCKYCY1EF104Z J 0.1 Ceramic C1830 VCEAPF1EN336M J 33 Electrolytic OUTPUT UNIT (Continued) C1831 VCKYCY1EF104Z J 0.1 Ceramic C1832 VCKYCY1EF104Z J 0.1 Ceramic C1473 VCKYCY1EF104Z J 0.1...
  • Page 85 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 R1032 VRS-CY1JF751J J 750 1/16W Metal Oxide R1033 VRS-CY1JF122J J 1.2k 1/16W Metal Oxide OUTPUT UNIT (Continued) R1034 VRS-TW2ED750J J 75 1/4W Metal Oxide R1035 VRS-CY1JF751J...
  • Page 86 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 R1202 VRS-TV1JD3R9J J 3.9 1/16W Metal Oxide R1203 VRS-TV1JD3R9J J 3.9 1/16W Metal Oxide OUTPUT UNIT (Continued) R1204 VRS-TV1JD3R9J J 3.9 1/16W Metal Oxide R1205 VRS-TV1JD3R9J J 3.9...
  • Page 87 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 R1723 VRN-CY1JF102D J 1.0k 1/16W Metal Film R1724 VRN-CY1JF470D J 47 1/16W Metal Film OUTPUT UNIT (Continued) R1725 VRS-CY1JF103J J 10k 1/16W Metal Oxide R1727 VRN-CY1JF562D J 5.6k 1/16W Metal Film...
  • Page 88 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 R1930 VRS-CY1JF2R2J J 2.2 1/16W Metal Oxide R1931 VRS-CY1JF2R2J J 2.2 1/16W Metal Oxide OUTPUT UNIT (Continued) R1932 VRS-TW2ED821J J 820 1/4W Metal Oxide R1933 VRS-TW2ED821J...
  • Page 89 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 R6166 VRS-CY1JF103J J 10k 1/16W Metal Oxide R6167 VRS-CY1JF103J J 10k 1/16W Metal Oxide OUTPUT UNIT (Continued) R6168 VRS-CY1JF101J J 100 1/16W Metal Oxide R6169 VRS-CY1JF101J...
  • Page 90 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA025DE02 P1701 QPLGN0185FJZZ J Plug, 13-pin (EA) P2001 QPLGN0180FJZZ J Plug, 8-pin (MB) OUTPUT UNIT (Continued) P2002 QPLGN0182FJZZ J Plug, 10-pin (MA) P2510 QPLGN0184FJZZ J Plug, 12-pin (LA)
  • Page 91 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 Q2029 VS2SC2412KQ-1 J 2SC2412KQ Q2030 VS2SA1037KQ-1 J 2SA1037KQ MAIN UNIT Q3001 VSDTC144EK/-1 J DTC144EK Q3002 VSDTC144EK/-1 J DTC144EK INTEGRATED CIRCUITS Q3003 VS2SC2412KQ-1 J 2SC2412KQ Q3004 VS2SC2412KQ-1...
  • Page 92 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 CF4003 RCRSC0009GEZZ J Filter CF4004 RFiLA0034CEZZ J Filter MAIN UNIT (Continued) CF4005 RFiLA0099CEZZ J Filter D2023 RH-EX0552CEZZ J Zener Diode, 12V COILS AND TRANSFORMER D2024 RH-EX0522CEZZ J Zener Diode, 6.2V...
  • Page 93 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 C3143 VCCCCY1HH101J J 100p Ceramic C3144 VCKYCY1HB103K J 0.01 Ceramic MAIN UNIT (Continued) C3145 VCKYCY1HB103K J 0.01 Ceramic C3146 VCKYCY1CF224Z J 0.22 Ceramic C3009 VCEAPF1EW336M J 33...
  • Page 94 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 C4151 VCCCCY1HH101J J 100p Ceramic C4152 VCCCCY1HH101J J 100p Ceramic MAIN UNIT (Continued) C4153 VCCCCY1HH330J J 33p Ceramic C4154 VCCCCY1HH330J J 33p Ceramic C4071 VCKYCY1EF104Z J 0.1...
  • Page 95 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 R2099 VRS-CY1JF101J J 100 1/16W Metal Oxide R2100 VRS-CY1JF562J J 5.6k 1/16W Metal Oxide MAIN UNIT (Continued) R2101 VRS-CB1JF562J J 5.6k 1/16W Metal Oxide R2102 VRS-CB1JF151J J 150 1/16W Metal Oxide C4245 VCCCCY1HH1R0C J 1.0p...
  • Page 96 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 R3068 VRS-CY1JF000J 1/16W Metal Oxide R3069 VRS-CY1JF104J J 100k 1/16W Metal Oxide MAIN UNIT (Continued) R3070 VRS-CY1JF104J J 100k 1/16W Metal Oxide R3071 VRS-CY1JF183J J 18k 1/16W Metal Oxide...
  • Page 97 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 R4101 VRS-CY1JF681J J 680 1/16W Metal Oxide R4102 VRS-CY1JF471J J 470 1/16W Metal Oxide MAIN UNIT (Continued) R4103 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R4104 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide...
  • Page 98 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 R4268 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R4269 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide MAIN UNIT (Continued) R4270 VRS-CY1JF100J J 10 1/16W Metal Oxide R4271 VRS-CY1JF274J...
  • Page 99 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA026DE02 FB2065 RBLN-0058TAZZ J Ferrite Bead FB2067 RBLN-0058TAZZ J Ferrite Bead MAIN UNIT (Continued) FB2068 RBLN-0058TAZZ J Ferrite Bead FB2069 RBLN-0058TAZZ J Ferrite Bead R4388 VRS-CY1JF562J J 5.6k 1/16W Metal Oxide...
  • Page 100 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA027DE02 R2530 VRD-RA2BE000J 1/8W Carbon R2531 VRD-RA2BE000J 1/8W Carbon TERMINAL UNIT R2532 VRD-RA2BE101J J 100 1/8W Carbon R2533 VRD-RA2BE101J J 100 1/8W Carbon DIODES R2534 VRD-RA2BE000J 1/8W...
  • Page 101 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA028DE02 DUNTKA029DE02 SOUND OUT UNIT CONTROL UNIT INTEGRATED CIRCUIT DIODES IC3015 VHiAN7191NZ-1 J AN7191NZ-LDC D2502 RH-PX0392CEZZ J LED, Lock D2503 RH-PX0390CEZZ J LED, Lamp TRANSISTORS D2504 RH-PX0390CEZZ...
  • Page 102 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA063DE01 RDENC0297CEZZ NETWORK-L UNIT POWER UNIT COILS INTEGRATED CIRCUITS L3100 RCiLZ1040CEZZ J Coil 0.82mH IC7001 9FJ0F09001060 J FA5314P L3101 RCiLZ1041CEZZ J Coil 0.82mH IC7101 9FJ0F09001070 J PQ2PF1...
  • Page 103 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code RDENC0297CEZZ C7204 9FJ0C50010265 J 470p Ceramic C7205 9FJ0C50010265 J 470p Ceramic POWER UNIT (Continued) C7207 9FJ0C71001235 J 0.1 Ceramic C7208 9FJ0C50010265 J 470p Ceramic ZD7102 9FJ0D31101015 J Zener Diode RD6.2JSAB2TA...
  • Page 104 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code RDENC0297CEZZ R7348 9FJ0R81002255 J 4.7k 1/6W Metal Film R7349 9FJ0R81003795 J 16k 1/6W Metal Film POWER UNIT (Continued) R7350 9FJ0R00101135 J 4.7k 1/6W Carbon R7351 9FJ0R00101375 J 47k 1/6W...
  • Page 105 HiNDP4063CEZZ J Indication LANGT9006CEFW J Mirror Angle (Rear), x2 TLABZ0730CEZZ J Caution Label VSP0012WBF94A J Speaker (Woofer), x2 HBDGS3152CESA J "SHARP" Badge VSP0030TB426A J Speaker (Tweeter), x2 PSPAZ0329CEZZ J Spacer, x6 HPNLC3042CESA J Decoration Panel PSPAZ0336CEZZ J Spacer (L), x2 Not Available –...

  • Page 106: Ë Cabinet And Mechanical Parts

    LC-R60HDU CABINET AND MECHANICAL PARTS Ref. No. Part No. Description Code Ref. No. Part No. Description Code 2-16 2-19 2-16 2-10 2-15 2-17 2-18 2-11 2-10 2-15 2-19 2-12 2-12 2-14 2-19 2-15 2-18 2-10 2-20 95 137 2-15 2-17...
  • Page 107 LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code 6-74 LX-BZ3382CEFD J Screw, x18 OPTICS MECHANISM PARTS 6-75 XHBSD26P05000 J Screw, x2 6-76 XBPSD30P05J00 J Screw, x6 6-77 XBBSF30P08000 J Screw, x12 LCHSK0078CEKZ J Optics Mecha. Base...
  • Page 108 LC-R60HDU OPTICS MECHANISM PARTS Ref. No. Part No. Description Code Ref. No. Part No. Description Code...

  • Page 109: Ë Packing Parts

    LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) ACCESSORIES SPAKC5034CEZZ – Packing Case — SPAKF0429CEZZ – Sleeve — å QACCU5013CEZZ J AC Cord SPAKF0430CEZZ – Buffer — QPLGJ0107GEZZ...

  • Page 110: Packing Of The Set

    LC-R60HDU Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING OF THE SET Packing Case No. Card Speaker Grille Sleeve AC Cord Wireless R/C Unit Buffer Material Polystylene Sheet Operation Manual BNC-RCA Adaptor Polystylene Cover Polystylene Sheet...
  • Page 111 Code Ref. No. Part No. Description Code COPYRIGHT © 2000 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Table of Contents