Using The Remote Control Unit; Inserting The Batteries; Cautions Regarding The Remote Control Unit - Sharp LCD colour TV Operation Manual

Preparation

Using the remote control unit

Inserting the batteries

Before using the TV for the first time, insert two supplied "AAA" size batteries. When the batteries become depleted
and the remote control unit fails to operate, replace the batteries with new "AAA" size batteries.
1
Open the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in
old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical
leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit
and sensor may prevent proper operation.

Cautions regarding the remote control unit

• Do not expose the remote control unit to shock. In addition, do not soak the remote
control unit to liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
• The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV, or operate the remote control unit closer to the remote control sensor.
10
LC-6070UD1H_EN_book.indb 10 LC-6070UD1H_EN_book.indb 10
2
Insert the two supplied "AAA"
size batteries.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
Remote control sensor
3
Close the battery cover.
1/2/2014 8:57:01 AM 1/2/2014 8:57:01 AM