Watching Tv; Daily Operation; Turning On/Off The Power - Using The Control Panel Of The Tv; Turning On/Off The Power - Using The Remote Control Unit - Sharp LCD colour TV Operation Manual

Watching TV

Daily operation

Turning on/off the power – using the control panel of the TV
Turning on/off the power – using the remote control unit
MPX
HOME
MENU
RETURN
Operation without a remote control unit
You can operate the menu settings using the TV control
panel.
MENU
INPUT
CH
VOL + /−
LC-6070UD1H_EN_book.indb 17 LC-6070UD1H_EN_book.indb 17
Turning on/off the power
1
Turn on the power.
Press < on the TV (after a few seconds, an image appears with
sound).
• Wait more than five seconds until you press < on the TV after inserting the
power plug.
2
Turn off the power.
Switch it off by pressing < on the TV.
Standby mode
1
To standby mode.
If the TV is turn on, you can switch it to standby by pressing <
on the remote control unit.
2
Switch on from standby.
From standby, press < on the remote control unit.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC
cord from the AC outlet.
• A small amount of electric power is still consumed even when the TV is in standby
mode.
Changing channels
1
Turn on the power.
2
Select a programme using 0–9 numeric buttons or CHr/s on the
remote control unit.
NOTE
• You can also select a programme using CHr/s on the TV control panel.
TV control panel
Y k/Y l
buttons
@
INPUT
CH r/CH s
Remote control
buttons
@
ENTER
a/b
d/c
17
1/2/2014 8:57:03 AM 1/2/2014 8:57:03 AM