Network Function; Playing Back Files From A Portable Device Or Pc; Key Lock; Easy Share Setting - Sharp LCD colour TV Operation Manual

Useful viewing functions
Option

Key lock

This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "Key lock".
Item
Off Unlocks the buttons.
Locks all buttons on the remote control
RC control lock
unit.
Button control Locks the buttons on the TV except the
lock power switch.
NOTE
• You cannot set both "RC control lock" and "Button control
lock" at the same time.
E
Cancelling the lock
Press @ on the TV and set to "Off" to cancel the
"RC control lock". Press @ on the remote control
unit and set to "Off" to cancel the "Button control lock".
NOTE
• See page 17 for the functions of the TV control panel buttons.
• To cancel "Button control lock", use the remote control.
50
LC-6070UD1H_EN_book.indb 50 LC-6070UD1H_EN_book.indb 50
Description

Network function

Playing back files from a portable
device or PC
With the remote playback function, you can use your
portable device to playback pictures, video and music on
the home network server.
• The TV has obtained DLNA's Digital Media Renderer (DMR)
certification.
• To use the remote playback function, your portable device or
PC must be a DLNA Certified Digital Media Controller.
• Please ensure that the TV and portable device or PC are in
the same network environment, and set portable device as
the server of TV.
For the network setting of TV, please refer to pages 50 – 52.

Easy share setting

1
Go to "HOME" > "TV Menu" > "Setup" > "View
setting" > "Network setup" > "Easy share setting".
Press a /b to select the item to be adjusted, and
2
then press ENTER to set.
E
Set easy share permission
Before this function can be used, you need to set the TV
to the status of being able to receive contents.
Item
Receiving and playing contents from
On
portable device or PC are allowed.
Receiving contents from portable device
Off
or PC is not allowed.
E
Time out setting
This sets the time until the TV returns automatically to TV
mode after remote playback ends.
Item
When the set time has elapsed after
10 sec./60 sec. remote playback ends, the TV returns
automatically to TV mode.
Select this to manually switch the TV
No
after remote playback ends.
NOTE
• This function may not work while an Internet application is
being used.
• Due to reasons including network environment, it may take
some time for the TV to start playing after the dragging
operation.
• If the wireless signals are too complicated, or multiple wireless
access points are available, operations may not be performed
properly due to signal interference.
• Some file formats may not match. For the file formats
supported by this function, please see Home network
server compatibility on page 65.
• Ultra HD media is not supported via DLNA.
Description
Description
1/2/2014 8:57:19 AM 1/2/2014 8:57:19 AM