Timer Setup Using Epg; Cancelling The Timer Setup - Sharp LCD colour TV Operation Manual

Watching TV

Timer setup using EPG

The TV can be switched to a programme or start
recording for USB recording at the set time.
1
Press EPG.
2
Press a/b/c/d to select the programme you
want to set, and then press ENTER.
3
Press c/d to select "Watch" or "Record", and
then press ENTER.
• If you select "No", the TV returns to the EPG screen.
Watch
4
Press c/d to select "Yes", and then press
ENTER.
• The selected TV programme is marked with an icon.
5
Press ENTER to select "Back".
NOTE
• You cannot select "Record" when the registered USB HDD is
not connected to the USB terminal.
• A combined total of 16 timer settings ("Watch" and "Record")
can be set.
• When the timer has been set, the TIMER indicator lights

Cancelling the timer setup

1
Press EPG.
2
Press a/b/c/d to select the programme with
timer setup, and then press ENTER.
3
Press c/d to select "Cancel", and then press
ENTER.
4
Press c/d to select "Yes", and then press
ENTER.
E
Cancelling using B button on the remote
control unit
1
Press EPG.
2
Press B to display the timer setup list.
3
Press a/b to select the programme you want to
cancel timer setup, and then press ENTER.
4
Press c/d to select "Cancel", and then press
ENTER.
5
Press c/d to select "Yes", and then press
ENTER.
LC-6070UD1H_EN_book.indb 25 LC-6070UD1H_EN_book.indb 25
Record No
red.
25
1/2/2014 8:57:07 AM 1/2/2014 8:57:07 AM