Connecting To The Network; Wired Installation; Wireless Installation - Sharp LCD colour TV Operation Manual

Network function

Connecting to the network

To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet. You can also connect the TV to your Home
network server through a router or access point. The TV
connection to the router can either be wired or wireless.
NOTE
• If you choose a wired connection to the router, you need an
LAN cable (commercially available).
• If you do not have a broadband internet connection, consult
the store where you purchased your TV or ask your internet
service provider or telephone company.
• An LAN and wireless connection cannot be used at the same
time. Use only one of the connection types.
• A stable connection speed is required to play back streaming
content, otherwise you may not be able to watch normally.

Wired installation

Use an LAN cable to connect the LAN terminal on the
TV to your broadcast router as shown below. This is
recommended when enjoying services which require
stable connection speeds, such as streaming media.
E
Wired connection overview
PC (home network server)
Router (commercially available)
LAN cable (commercially available)
Network
E
How to connect
Router
LAN
LAN cable (commercially available)
1
Switch on the router (commercially available).
Refer to the router's operation manual for
switching on.
2
Connect the LAN terminal on the TV to the router
(commercially available) with an LAN cable
(commercially available).
LC-6070UD1H_EN_book.indb 51 LC-6070UD1H_EN_book.indb 51
When using Easy setup function
E
Refer to "How to connect".
3
Go to "HOME" > "TV Menu" > "Setup" >
"View setting" > "Network setup" > "LAN setting"
> "Easy setup".
4
Press c/d to select "Yes", and then press
ENTER.
5
Press a/b to select "Wired", and then press
ENTER.
6
Please input according to direction of a screen,
and finally input "Complete".
When using Manual setup function
E
Refer to "How to connect".
3
Go to "HOME" > "TV Menu" > "Setup" >
"View setting" > "Network setup" > "LAN setting"
> "Manual setup" > select "Yes" > "Connection
type".
4 Press c/d to select "Wired", and then press
ENTER.
5
Select "OK" to confirm.
• The wired connection will be automatically established.
• If you have failed to connect to the internet in the above
operation, an error message will appear. In this case,
press TV/VIDEO on the remote control or INPUT on
the TV to return to the normal TV screen and check the
relevant settings.
NOTE
• To change the settings manually, go to "HOME"
"Network setup"
instructions and the operation manual of the router.
TV
Connection type
Wireless setup
IP setup
LAN terminal

Wireless installation

Use the wireless LAN USB adapter (supplied accessory).
E
Wireless connection overview
PC (home network server)
Wireless LAN router/access point
Wireless LAN USB adapter (supplied accessory)
Network
>
"IP setup" and follow the on-screen
Setting Ethernet info.
[Current setup]
IP address : Auto
Netmask : Auto
Gateway : Auto
DNS : Auto
MAC address : xx:xx:xx:xx:xx:xx
Change Initialize
1/2/2014 8:57:19 AM 1/2/2014 8:57:19 AM
>
51