Analogue Setting - Sharp LCD colour TV Operation Manual

Basic adjustment
Buttons for "Manual adjust" operation
Lock Press R button.
When the service is locked, you must enter your password
whenever you tune to the service.
CH skip Press G button.
Services with a ✓ mark are passed over when pressing
CHr/s on the TV or remote control unit.
Delete Press Y button.
The selected service is deleted. If you want to watch the
service you deleted once again, perform "Auto installation",
"Additional search", or "Manual search".

Analogue setting

1
Go to "HOME" > "TV Menu" > "Setup" > "View
setting" > "Channel setting" > "Programme
setup".
2
If you have already set the password, enter it here.
• See page 43 for setting a password.
3
The "Analogue setting" screen displays, and then
press ENTER.
4
Repeat steps 4 and 5 in Digital setting.
NOTE
• The "Analogue setting" menu is available only for watching TV
in A-TV mode.
Additional search
Use this menu to add new services automatically after
"Analogue Search" in the "Auto installation" menu has
been completed.
LC-6070UD1H_EN_book.indb 41 LC-6070UD1H_EN_book.indb 41
Manual adjust
You can reconfigure the analogue TV channels settings
automatically or manually.
After selecting "Yes" on the screen, press a/b/
c/d to select the channel you want to set and
then press ENTER.
Programme Setup "Manual adjust" menu
You can select one of the following settings.
Search
You can add a new channel within a specified frequency band.
Item
Next Search the next channel.
Store Memorise the current display channel.
Return to the previous screen (the search
Cancel
result will not be stored).
Fine
You can adjust the frequency to the desired position.
1
You can set by directly entering the frequency
number of the channel with 0–9 numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ENTER.
NOTE
• Adjust while checking the background picture as a reference.
• When setting a frequency on the "Fine" screen, the last figure
of the frequency needs to be "0" or "5".
Colour system
Select the optimum colour system to receive ("Auto",
"PAL", "SECAM", "NTSC3.58").
Sound system
Select the optimum sound systems (broadcasting
systems) to receive ("B/G", "D/K", "I", "M").
NOTE
• Check the sound system if the sound output were not
correct.
Next
Description
1/2/2014 8:57:15 AM 1/2/2014 8:57:15 AM
41