Setting - Bosch HBA 73B5.0 A Instructions For Use Manual

Setting

Self cleaning has finished
Changing the cleaning level
Cancelling self cleaning
Setting a later end time
28
d
There is a risk of serious damage to health.
Never let non stick baking trays or tins go through the
automatic self cleaning cycle. High temperatures
cause damage to the non stick coating and
poisonous gases to be released.
When you have selected a cleaning level, set the
oven.
1. Set the function selector to q self cleaning.
2. Use the temperature selector to set the cleaning
level.
The display shows the time at which self cleaning will
end and the p symbol is in brackets.
Self cleaning starts after a few seconds. You will see
the time counting down and the r symbol is in
brackets. The p symbol goes out.
The oven door locks shortly after cleaning starts.
The L symbol lights up in the display. You cannot
open the oven door again until the L symbol goes
out.
00:00 is shown in the display. The oven stops heating.
Turn the function selector to the zero setting. The
oven switches off.
The oven door cannot be opened again until the
L symbol goes out in the display.
Once you have started the cleaning process, the
cleaning level cannot be changed.
Turn the function selector to the zero setting. The
oven switches off.
The oven door cannot be opened again until the
L symbol goes out in the display.
The end time of the self cleaning can be delayed. In
this way, self cleaning can run overnight, for example,
so that you can use your oven during the day.