Basic setting
c6 Reset all values to the factory
settings
*
Factory setting
Automatic switch off
Automatic switch off
is activated
Overriding automatic
switch off
Selection 0
Selection 1
no*
yes
The oven must be switched off.
1. Press the 0 button for approximately 4 seconds.
The current basic setting for signal duration is
shown in the display, e.g. c1 2 for selection 2.
2. Change the basic setting with button @ or A.
3. Confirm with button 0.
The next basic setting is shown in the display. You
can use the 0 button to scroll through all levels
and make changes using the @ or A button.
4. Finally, press the 0 button for approximately
4 seconds.
All basic settings are adopted.
Your basic settings can be changed again at any time.
If you do not change the settings on your appliance
for several hours, automatic switch off is activated.
The oven stops heating. The point at which this
occurs depends on the temperature or grill setting
that has been set.
A signal sounds. F8 appears in the display.
The oven stops heating.
Turn the function selector to the off position. The oven
switches off.
So that automatic switch off is not activated when it
is not wanted, you can set a time period.
The oven will heat until this period has expired.
Selection 2
Selection 3
25