Table of Contents
Advertisement
A S S E M B LY I N S T R U C T I O N S
NOTE: If the KD SCREW(S) do not fit during as-
sembly, loosen the 2 screws to adjust the PLAS-
TIC CONNECTOR until the PANELS/KD SCREWS
can be installed.
Step 2: Attach 12 Plastic connectors [X] to Left
front panel [D], Right front panel [E], Left side
panel [F] and Right side panel [G] with 24 KD
screws (2 screws for each connector). See Fig. B.
Step 3: Attach Left side panel [F] to Left front
panel [D] with 2 KD screws. Attach Right side
panel [G] to Right front panel [E] with 2 KD
screws. See Fig. C.
Fig. A
Fig. B
Step 4: Attach Left front panel [D] and Left
side panel [F] to Base [B] with 3 KD screws.
Attach Right front panel [E] and Right side
panel [G] to Base [B] with 3 KD screws.
See Fig. D.
Step 5: Attach Front panel [C] to Left front
panel [D] and Right front panel [E] with 2 KD
screws. See Fig. E.
6
Fig. C
Fig. D
Advertisement
Table of Contents
