Table of Contents
Advertisement
Remove These Screws
Figure 6-3. Removing the Chassis Cover
Warning: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airfl ow and prevent
overheating.
6-4
System Fan
A single 10-cm blower fan provides suffi cient cooling for the SuperServer 5018A-
MLTN4.
The fan can adjust its speed according to the heat level sensed in the system, which
results in more effi cient and quieter fan operation. Fan speed is controlled by IPMI.
Chapter 6: Advanced Chassis Setup
Remove These Screws
6-3
Remove This Screw
Advertisement
Table of Contents
