Installing Internal Drives In Bays 1, 2, 3 And 4 - IBM A40I TYPE 2271 Hardware Maintenance Manual

1
Bay 1 - Max Height:
2
Bay 2 - Max Height:
3
Bay 3 - Max Height:
4
Bay 4 - Max Height:
5
Bay 5 - Max Height:
6
Bay 6 - Max Height:
7
Bay 7 - Max Height:

Installing internal drives in bays 1, 2, 3 and 4

1. Remove the cover (see "Removing the cover" on page 15).
2. If the drive you are installing is a removable-media drive, remove the bay
panel from the front bezel.
3. Insert a flat–bladed screwdriver into one of the slots on the static shield in the
drive bay into which you are installing the drive and gently pry the static
shield loose from the drive bay.
41.3 mm (1.6 in.)
CD-ROM drive (standard in some models)
5.25-inch hard disk drive
41.3 mm (1.6 in.)
5.25-inch hard disk drive
3.5-inch hard disk drive (requires a mounting bracket)
CD-ROM drive
DVD-ROM drive
25.4 mm (1.0 in.)
3.5-inch diskette drive
25.4 mm (1.0 in.)
Hard disk drive
3.5-inch removable drive
25.4 mm (1.0 in.)
Hard disk drive
25.4 mm (1.0 in.)
Hard disk drive
25.4 mm (1.0 in.)
Hard disk drive
Chapter 4. Installing Options
17